Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Paul Dormer said:
http://cgi.ebay.co.uk/ws/eBayISAPI.d...52896 53&rd=1 That one would have been of little use to you, Paul. It's definitely a MONO amp, probably with 2 x 807 PP and a 5U4G rectifier or something. There's only one power tranny and one output tranny. A boatanchor, and at nearly 30 quid an expensive one to boot. -- Sander deWaal "SOA of a KT88? Sufficient." |
#2
![]() |
|||
|
|||
![]()
Paul Dormer wrote:
http://cgi.ebay.co.uk/ws/eBayISAPI.d...52896 53&rd=1 Just shows you can sell *anything* on ebay ! Graham ;-) |
#3
![]() |
|||
|
|||
![]() "Pooh Bear" wrote in message ... Paul Dormer wrote: http://cgi.ebay.co.uk/ws/eBayISAPI.d...52896 53&rd=1 Just shows you can sell *anything* on ebay ! Indeed. Notice the peanut-sized output transformer. Maybe a PA amp? |
#4
![]() |
|||
|
|||
![]() Arny Krueger wrote: "Pooh Bear" wrote in message ... Paul Dormer wrote: http://cgi.ebay.co.uk/ws/eBayISAPI.d...52896 53&rd=1 Just shows you can sell *anything* on ebay ! Indeed. Notice the peanut-sized output transformer. Maybe a PA amp? Who knows ? If those really are 807s in the output - certainly the top-cap fits the bill, I'd say the output tranny was *way* undersized. Maybe it's a 'starved plate' design ? Graham |
#5
![]() |
|||
|
|||
![]()
Sander deWaal wrote:
Paul Dormer said: http://cgi.ebay.co.uk/ws/eBayISAPI.d...280&item=57152 89653&rd=1 That one would have been of little use to you, Paul. It's definitely a MONO amp, probably with 2 x 807 PP and a 5U4G rectifier or something. There's only one power tranny and one output tranny. A boatanchor, and at nearly 30 quid an expensive one to boot. -- Sander deWaal "SOA of a KT88? Sufficient." I can think of some other uses, but they are quite sadistic in application. They would involve (1) a French pig "enthusiast" (I cleaned it up for RAO), and (2) A Southern California stock clerk for a well known speaker manufacturer (this is information I have on good authority from a well-known Californian poster who has requested confidentiality). Bruce J. Richman |
#6
![]() |
|||
|
|||
![]() "Pooh Bear" wrote in message ... Arny Krueger wrote: "Pooh Bear" wrote in message ... Paul Dormer wrote: http://cgi.ebay.co.uk/ws/eBayISAPI.d...52896 53&rd=1 Just shows you can sell *anything* on ebay ! Indeed. Notice the peanut-sized output transformer. Maybe a PA amp? Who knows ? If those really are 807s in the output - certainly the top-cap fits the bill, I'd say the output tranny was *way* undersized. I compared the size of the output transformer and the power transformer. In a Hifi tubed amp, they should be far more similar in size. The power transformer handles more power, but it is supposed to work down to about 1/3 the frequency. Maybe it's a 'starved plate' design ? LOL! |
#7
![]() |
|||
|
|||
![]()
Pooh Bear said:
Indeed. Notice the peanut-sized output transformer. Maybe a PA amp? If those really are 807s in the output - certainly the top-cap fits the bill, I'd say the output tranny was *way* undersized. Probably an organ amp or something, the power tranny may had to feed other circuits as well. Maybe it's a 'starved plate' design ? That's something else. Can't be applied to power amps. -- Sander deWaal "SOA of a KT88? Sufficient." |
#9
![]() |
|||
|
|||
![]() Sander deWaal wrote: Pooh Bear said: Indeed. Notice the peanut-sized output transformer. Maybe a PA amp? If those really are 807s in the output - certainly the top-cap fits the bill, I'd say the output tranny was *way* undersized. Probably an organ amp or something, the power tranny may had to feed other circuits as well. Maybe it's a 'starved plate' design ? That's something else. Can't be applied to power amps. Wanna bet ? Let's try it ! Graham |
#10
![]() |
|||
|
|||
![]()
Pooh Bear said:
Maybe it's a 'starved plate' design ? That's something else. Can't be applied to power amps. Wanna bet ? Let's try it ! As a power stage? Nope. As a driver, maybe. -- Sander deWaal "SOA of a KT88? Sufficient." |
#11
![]() |
|||
|
|||
![]()
Sander deWaal wrote:
Pooh Bear said: Maybe it's a 'starved plate' design ? That's something else. Can't be applied to power amps. Wanna bet ? Let's try it ! As a power stage? Nope. As a driver, maybe. Just being mischeivious ! Graham ;-) |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Powerful Argument in Favor of Agnosticism and Athetism | Audio Opinions | |||
Are vintage DACs a bargain? | High End Audio | |||
MMXpress not worth a damn anymore? | Car Audio | |||
..the most unbelieveable audio bargain I have ever experienced... | High End Audio | |||
OT - Pretty Damn Funny Website | Pro Audio |