Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi,
I found some old Marantz boxes in the attic. LD20 if that means anything to anybody anymore, probably not. 14" by 9" by 10" outside, 2 way, vented. Foam turned to dust on bass units. Since all I have is two probably usefull ready-made enclosures my question is what speakers should I get to use there. Not expensive and available in UK. I would appreciate your recomendations. The original tweeters might work but the quality? The mid/bass opening is 168mm, centre to centre is 143mm. All openings can be cut bigger, vent can be closed, etc. Is there any info site where I can compare dimensions or find calculations to arrive at proper crossover frequencies. Maybe manufactors datasheet sites? My old ref books are gone and any math background I had went with them. It was long ago since I DIY-ed speakers and the old favorites are irelevant today probably. Thanks ayosha |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
My equipment review of the Bose 901 | Audio Opinions | |||
Comments about Blind Testing | High End Audio | |||
Help Speaker replacement advice needed | Audio Opinions | |||
Infinity QLS1 Woofer replacement advice needed | High End Audio | |||
Simple Crossover Network - Advice Needed | High End Audio |