Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I have just acquired a nice B&O Beogram 2000 turntable, but the
original 5-pin DIN connector has been hacked off and replaced with a pair of female RCA jacks. I'd like to put a 5-pin jack back on, but don't know which wires go where. I know which wires are dedicated to the phono out, and know that the two remaining wires must be for integration with the rest of the B&O system. Does anyone have a service manual which could tell me which color wire goes to which pin? |
#2
![]() |
|||
|
|||
![]()
"Craig Hairrell" wrote in message
om... I have just acquired a nice B&O Beogram 2000 turntable, but the original 5-pin DIN connector has been hacked off and replaced with a pair of female RCA jacks. I'd like to put a 5-pin jack back on, but don't know which wires go where. I know which wires are dedicated to the phono out, and know that the two remaining wires must be for integration with the rest of the B&O system. Does anyone have a service manual which could tell me which color wire goes to which pin? Are you sure it's not just left +, right +, left -, right -, ground? |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
f.S. Tons of cheapgear | Pro Audio | |||
F.S. tons of gear for sale, keys, modules, pro audio, etc | Pro Audio | |||
Replacing belt in R.Shack turntable | General | |||
beogram 8000 turntable repair any shadetree repair techs out there? s | High End Audio |