[Frank]

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

--
Frank, Independent Consultant, New York, NY
[Please remove 'nojunkmail.' from address to reply via e-mail.]
Read Frank's thoughts on HDV at http://www.humanvalues.net/hdv/
[also covers AVCHD (including AVCCAM & NXCAM) and XDCAM EX].

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs (disks),
you need to specify.

d

[Frank]

On Wed, 29 Jun 2011 17:36:55 GMT, in 'rec.audio.pro',
in article Will everyone stop saying tic,
(Don Pearce) wrote:

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs (disks),
you need to specify.


Well, I'm going to have to disagree with you, Don.

In my view, it's more than a simple case of alternative spellings.

Computer-related terms, and indeed most technical terms, cross
national (and cultural) boundaries.

The formal (and official) definition of CD is Compact Disc, not
Compact Disk.

The formal (and official) definition of BD is Blu-ray Disc, not
Blu-ray Disk. (And the correct abbreviation is BD, not BR.)

And surely you wouldn't write, discette, would you?

I can certainly accept American English and British English spelling
differences of words such as behavior and behaviour, color and colour,
center and centre, defense and defence, to name a few obvious
examples, but technical terms and expressions, for the sake of clarity
and good communication, should not be treated this way, especially in
the case of terms that have a more or less official definition (and
particular spelling) such as Blu-ray Disc.

And as far as hard disks are concerned, I guess that we have IBM to
thank (blame?) for that.

Back in the late 1960s/early 1970s, when I first became involved with
mainframe computer systems, I do know that since IBM was referring to
them as disks, that I certainly wasn't going to write reports and
memos with the spelling disc, and this despite the fact that I was
somewhat taken aback by the "disk" spelling that IBM had used in their
sales literature.

I vividly recall that every time I would read the word disk, my mind
would say, "no, the correct spelling is disc", but eventually I
trained myself to think and write disk. Sometimes, if you can't beat
them, you may as well join them.

Also, if I were to insert a Blu-ray Disc into my Blu-ray Disc player,
and were to write about it, I would write "disc" and not "disk".

P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

--
Frank, Independent Consultant, New York, NY
[Please remove 'nojunkmail.' from address to reply via e-mail.]
Read Frank's thoughts on HDV at http://www.humanvalues.net/hdv/
[also covers AVCHD (including AVCCAM & NXCAM) and XDCAM EX].

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 14:53:47 -0400, Frank
wrote:

On Wed, 29 Jun 2011 17:36:55 GMT, in 'rec.audio.pro',
in article Will everyone stop saying tic,
(Don Pearce) wrote:

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs (disks),
you need to specify.


Well, I'm going to have to disagree with you, Don.

In my view, it's more than a simple case of alternative spellings.

Computer-related terms, and indeed most technical terms, cross
national (and cultural) boundaries.

The formal (and official) definition of CD is Compact Disc, not
Compact Disk.

The formal (and official) definition of BD is Blu-ray Disc, not
Blu-ray Disk. (And the correct abbreviation is BD, not BR.)

And surely you wouldn't write, discette, would you?

I can certainly accept American English and British English spelling
differences of words such as behavior and behaviour, color and colour,
center and centre, defense and defence, to name a few obvious
examples, but technical terms and expressions, for the sake of clarity
and good communication, should not be treated this way, especially in
the case of terms that have a more or less official definition (and
particular spelling) such as Blu-ray Disc.

And as far as hard disks are concerned, I guess that we have IBM to
thank (blame?) for that.

Back in the late 1960s/early 1970s, when I first became involved with
mainframe computer systems, I do know that since IBM was referring to
them as disks, that I certainly wasn't going to write reports and
memos with the spelling disc, and this despite the fact that I was
somewhat taken aback by the "disk" spelling that IBM had used in their
sales literature.

I vividly recall that every time I would read the word disk, my mind
would say, "no, the correct spelling is disc", but eventually I
trained myself to think and write disk. Sometimes, if you can't beat
them, you may as well join them.

Also, if I were to insert a Blu-ray Disc into my Blu-ray Disc player,
and were to write about it, I would write "disc" and not "disk".


I have a hard disc in my computer.

P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

These words transcend technical accuracy - they are cultural. I Hoover
my house with a Dyson.

d

[Mike Rivers]

On 6/29/2011 3:05 PM, Don Pearce wrote:

These words transcend technical accuracy - they are cultural. I Hoover
my house with a Dyson.

Someone asked me what kind of Garmin I had. Then I
discovered that it's common for New Englanders to call any
portable GPG a "Garmin."

My Garmin is a Tom Tom.


--
"Today's production equipment is IT based and cannot be
operated without a passing knowledge of computing, although
it seems that it can be operated without a passing knowledge
of audio." - John Watkinson

http://mikeriversaudio.wordpress.com - useful and
interesting audio stuff

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 17:18:36 -0400, Mike Rivers
wrote:

On 6/29/2011 3:05 PM, Don Pearce wrote:

These words transcend technical accuracy - they are cultural. I Hoover
my house with a Dyson.

Someone asked me what kind of Garmin I had. Then I
discovered that it's common for New Englanders to call any
portable GPG a "Garmin."

My Garmin is a Tom Tom.

I presume that means Garmin is bigger than Tomtom over there. I think
it is probably the other way around this side of the pond. Luckily
here nobody uses a proper name - it is just a satnav.

d

[Gareth Magennis]

"Don Pearce" wrote in message
...
On Wed, 29 Jun 2011 17:18:36 -0400, Mike Rivers
wrote:

On 6/29/2011 3:05 PM, Don Pearce wrote:

These words transcend technical accuracy - they are cultural. I Hoover
my house with a Dyson.

Someone asked me what kind of Garmin I had. Then I
discovered that it's common for New Englanders to call any
portable GPG a "Garmin."

My Garmin is a Tom Tom.

I presume that means Garmin is bigger than Tomtom over there. I think
it is probably the other way around this side of the pond. Luckily
here nobody uses a proper name - it is just a satnav.

d


That may be because "Tomtom" is the kind of thing that comes out of a 5 year
olds mouth, and probably means a part of human anatomy, whereas
"Satnav" sounds so much more grown up and worth the money we have spent on
it.


Gareth.

[John Williamson]

Frank wrote:
On Wed, 29 Jun 2011 17:36:55 GMT, in 'rec.audio.pro',
in article Will everyone stop saying tic,
(Don Pearce) wrote:

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!
Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs (disks),
you need to specify.


Well, I'm going to have to disagree with you, Don.

In my view, it's more than a simple case of alternative spellings.

Computer-related terms, and indeed most technical terms, cross
national (and cultural) boundaries.

The formal (and official) definition of CD is Compact Disc, not
Compact Disk.

The formal (and official) definition of BD is Blu-ray Disc, not
Blu-ray Disk. (And the correct abbreviation is BD, not BR.)

And surely you wouldn't write, discette, would you?

I can certainly accept American English and British English spelling
differences of words such as behavior and behaviour, color and colour,
center and centre, defense and defence, to name a few obvious
examples, but technical terms and expressions, for the sake of clarity
and good communication, should not be treated this way, especially in
the case of terms that have a more or less official definition (and
particular spelling) such as Blu-ray Disc.

And as far as hard disks are concerned, I guess that we have IBM to
thank (blame?) for that.

Back in the late 1960s/early 1970s, when I first became involved with
mainframe computer systems, I do know that since IBM was referring to
them as disks, that I certainly wasn't going to write reports and
memos with the spelling disc, and this despite the fact that I was
somewhat taken aback by the "disk" spelling that IBM had used in their
sales literature.

I vividly recall that every time I would read the word disk, my mind
would say, "no, the correct spelling is disc", but eventually I
trained myself to think and write disk. Sometimes, if you can't beat
them, you may as well join them.

Also, if I were to insert a Blu-ray Disc into my Blu-ray Disc player,
and were to write about it, I would write "disc" and not "disk".

P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

They put their footage on a CF or SD card, too, sometimes.
--
Tciao for Now!

John.

[Bill Graham]

Frank wrote:
On Wed, 29 Jun 2011 17:36:55 GMT, in 'rec.audio.pro',
in article Will everyone stop saying tic,
(Don Pearce) wrote:

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible)
diskette, is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs
(disks), you need to specify.


Well, I'm going to have to disagree with you, Don.

In my view, it's more than a simple case of alternative spellings.

Computer-related terms, and indeed most technical terms, cross
national (and cultural) boundaries.

The formal (and official) definition of CD is Compact Disc, not
Compact Disk.

The formal (and official) definition of BD is Blu-ray Disc, not
Blu-ray Disk. (And the correct abbreviation is BD, not BR.)

And surely you wouldn't write, discette, would you?

I can certainly accept American English and British English spelling
differences of words such as behavior and behaviour, color and colour,
center and centre, defense and defence, to name a few obvious
examples, but technical terms and expressions, for the sake of clarity
and good communication, should not be treated this way, especially in
the case of terms that have a more or less official definition (and
particular spelling) such as Blu-ray Disc.

And as far as hard disks are concerned, I guess that we have IBM to
thank (blame?) for that.

Back in the late 1960s/early 1970s, when I first became involved with
mainframe computer systems, I do know that since IBM was referring to
them as disks, that I certainly wasn't going to write reports and
memos with the spelling disc, and this despite the fact that I was
somewhat taken aback by the "disk" spelling that IBM had used in their
sales literature.

I vividly recall that every time I would read the word disk, my mind
would say, "no, the correct spelling is disc", but eventually I
trained myself to think and write disk. Sometimes, if you can't beat
them, you may as well join them.

Also, if I were to insert a Blu-ray Disc into my Blu-ray Disc player,
and were to write about it, I would write "disc" and not "disk".

P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either. It is hard for me to change my language in some cases, because at
75, I have been hearing and using some of these terms for many years.

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 12:38:54 -0700, "Bill Graham"
wrote:

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either. It is hard for me to change my language in some cases, because at
75, I have been hearing and using some of these terms for many years.

You say euphemism, but I presume you mean synonym. A CD is also a
record, but we only really use the word for a vinyl disc.

d

[Bill Graham]

Don Pearce wrote:
On Wed, 29 Jun 2011 12:38:54 -0700, "Bill Graham"
wrote:

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either. It is hard for me to change my language in some cases,
because at 75, I have been hearing and using some of these terms for
many years.

You say euphemism, but I presume you mean synonym. A CD is also a
record, but we only really use the word for a vinyl disc.

d

No. A synonym means the same thing. But tape doesn't mean record. It can be
a sticky strip used for sealing packages. It is a euphamism for record when
used in reference to what you do with a recording machine.

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 12:51:09 -0700, "Bill Graham"
wrote:

Don Pearce wrote:
On Wed, 29 Jun 2011 12:38:54 -0700, "Bill Graham"
wrote:

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either. It is hard for me to change my language in some cases,
because at 75, I have been hearing and using some of these terms for
many years.

You say euphemism, but I presume you mean synonym. A CD is also a
record, but we only really use the word for a vinyl disc.

d

No. A synonym means the same thing. But tape doesn't mean record. It can be
a sticky strip used for sealing packages. It is a euphamism for record when
used in reference to what you do with a recording machine.

A euphemism is a socially acceptable term used in place of one that
would give offence. "Tape" and "Record" are synonyms in this context
because they specifically do mean the same thing. It is the original
meanings that differ.

And it is euphemism, not euphamism.

d

[Ben Bradley[_2_]]

On Wed, 29 Jun 2011 19:42:46 GMT, (Don Pearce) wrote:

On Wed, 29 Jun 2011 12:38:54 -0700, "Bill Graham"
wrote:

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either. It is hard for me to change my language in some cases, because at
75, I have been hearing and using some of these terms for many years.

You say euphemism, but I presume you mean synonym.

Recording can be dirty work. Keep your tape path clean.

A CD is also a
record, but we only really use the word for a vinyl disc.

d

[Mike Rivers]

On 6/29/2011 3:38 PM, Bill Graham wrote:

I guess you don't accept the word, "tape" as a euphamism for
"record" either.

I don't think "euphamism" is the right word for it, but I
frequently hear on radio news programs "Mr. Plybzxt
declined to be interviewed on tape." or "Let's roll the
tape." None of that stuff is tape based any more, not even
the reporter's field recorder.

I have started referring to "Recorder outputs" on a console,
though, rather than "Tape outputs," at least when I
remember. But they're still usually labeled "Tape."


--
"Today's production equipment is IT based and cannot be
operated without a passing knowledge of computing, although
it seems that it can be operated without a passing knowledge
of audio." - John Watkinson

http://mikeriversaudio.wordpress.com - useful and
interesting audio stuff

[[email protected]]

MIke Rivers writes,

I don't think "euphamism" is the right word for it, but I
frequently hear on radio news programs "Mr. Plybzxt
declined to be interviewed on tape." or "Let's roll the
tape." None of that stuff is tape based any more, not even
the reporter's field recorder.
I have started referring to "Recorder outputs" on a console,
though, rather than "Tape outputs," at least when I
remember. But they're still usually labeled "Tape."

INdeed they are, and I'll refer to "tape" even though it's
captured on a hard drive. My signal to talent is also still
"rolling."

Btw, that "Garmin" for gps must be an east coast thing.
Around here they're still a GPS.





Richard webb,

replace anything before at with elspider
ON site audio in the southland: see www.gatasound.com

[Frank]

On Wed, 29 Jun 2011 12:38:54 -0700, in 'rec.audio.pro',
in article Will everyone stop saying tic,
"Bill Graham" wrote:

Frank wrote:
On Wed, 29 Jun 2011 17:36:55 GMT, in 'rec.audio.pro',
in article Will everyone stop saying tic,
(Don Pearce) wrote:

On Wed, 29 Jun 2011 12:53:41 -0400, Frank
wrote:

And could otherwise knowledgeable people please learn the difference
between disk and disc?

A disk, as in a hard disk drive (HDD) or a floppy (flexible)
diskette, is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

In summary, if it's optical, it's disc. If it's magnetic, then it's
disk.

Thank you and have a good day!

Well, I'm going to disagree. Disk and disc are simply alternative
spellings. More specifically disk is a US and Canada-preferred
spelling of the English word disc.

If you want to distinguish between magnetic and optical discs
(disks), you need to specify.


Well, I'm going to have to disagree with you, Don.

In my view, it's more than a simple case of alternative spellings.

Computer-related terms, and indeed most technical terms, cross
national (and cultural) boundaries.

The formal (and official) definition of CD is Compact Disc, not
Compact Disk.

The formal (and official) definition of BD is Blu-ray Disc, not
Blu-ray Disk. (And the correct abbreviation is BD, not BR.)

And surely you wouldn't write, discette, would you?

I can certainly accept American English and British English spelling
differences of words such as behavior and behaviour, color and colour,
center and centre, defense and defence, to name a few obvious
examples, but technical terms and expressions, for the sake of clarity
and good communication, should not be treated this way, especially in
the case of terms that have a more or less official definition (and
particular spelling) such as Blu-ray Disc.

And as far as hard disks are concerned, I guess that we have IBM to
thank (blame?) for that.

Back in the late 1960s/early 1970s, when I first became involved with
mainframe computer systems, I do know that since IBM was referring to
them as disks, that I certainly wasn't going to write reports and
memos with the spelling disc, and this despite the fact that I was
somewhat taken aback by the "disk" spelling that IBM had used in their
sales literature.

I vividly recall that every time I would read the word disk, my mind
would say, "no, the correct spelling is disc", but eventually I
trained myself to think and write disk. Sometimes, if you can't beat
them, you may as well join them.

Also, if I were to insert a Blu-ray Disc into my Blu-ray Disc player,
and were to write about it, I would write "disc" and not "disk".

P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

Regards,

I guess you don't accept the word, "tape" as a euphamism for "record"
either.

I would use the term "tape" if and only if a tape recording were to be
made, in which case I might say, "Let's tape this!".

If some other type of recording media were to be used, such as a hard
disk drive or a flash memory card, I would say, "Let's record this!".

Yes, I would actually think before speaking, and choose my words
carefully.

It is hard for me to change my language in some cases, because at
75, I have been hearing and using some of these terms for many years.

I'm certainly not going to pick on older people, but I have
encountered a few recently who refer to almost any form of recorded
media (aside from a phonograph record), such as a CD or DVD, as a
"tape". Drives me nuts, especially when they send me an e-mail message
asking if I've received the tape that they sent to me.

--
Frank, Independent Consultant, New York, NY
[Please remove 'nojunkmail.' from address to reply via e-mail.]
Read Frank's thoughts on HDV at http://www.humanvalues.net/hdv/
[also covers AVCHD (including AVCCAM & NXCAM) and XDCAM EX].

[Bill Graham]

Frank wrote:
I'm certainly not going to pick on older people, but I have
encountered a few recently who refer to almost any form of recorded
media (aside from a phonograph record), such as a CD or DVD, as a
"tape". Drives me nuts, especially when they send me an e-mail message
asking if I've received the tape that they sent to me.

If you understood what they meant, and they understand what you mean, then
there is no poroblem as far as I am concerned. After all, that is the
purpose of language. But you are certainly encouraged to be as correct as
possible, especially when you write something for general consumption......

[Don Pearce[_3_]]

On Wed, 29 Jun 2011 22:11:24 -0700, "Bill Graham"
wrote:

Frank wrote:
I'm certainly not going to pick on older people, but I have
encountered a few recently who refer to almost any form of recorded
media (aside from a phonograph record), such as a CD or DVD, as a
"tape". Drives me nuts, especially when they send me an e-mail message
asking if I've received the tape that they sent to me.

If you understood what they meant, and they understand what you mean, then
there is no poroblem as far as I am concerned. After all, that is the
purpose of language. But you are certainly encouraged to be as correct as
possible, especially when you write something for general consumption......

Exactly the view of the founding Fathers when they penned the second
amendment. Of course they thought they were dealing with an
intelligent, enlightened population rather than dingbats who thought
they could pick and choose among the words, ignoring the vital
qualification.

d

[Ed Anson]

On 6/29/11 2:53 PM, Frank wrote:
P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

So I suppose you would also object to someone saying he is "dialing" a
telephone. Telephones haven't had dials in decades. I wonder what we
should say instead?

[Steve King]

"Ed Anson" wrote in message
...
On 6/29/11 2:53 PM, Frank wrote:
P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

So I suppose you would also object to someone saying he is "dialing" a
telephone. Telephones haven't had dials in decades. I wonder what we
should say instead?

I recently read that younger people are referring to the way they input data
on computers and phones as, "Keying". Supposedly it came from really young
kids who have grown up with computers.

Steve King

[Don Pearce[_3_]]

On Thu, 30 Jun 2011 00:58:06 -0500, "Steve King"
wrote:

"Ed Anson" wrote in message
m...
On 6/29/11 2:53 PM, Frank wrote:
P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the term
"filming" would be appropriate, but when using a camcorder, they're
"shooting video", not "filming", at least as far as I'm concerned.

So I suppose you would also object to someone saying he is "dialing" a
telephone. Telephones haven't had dials in decades. I wonder what we
should say instead?

I recently read that younger people are referring to the way they input data
on computers and phones as, "Keying". Supposedly it came from really young
kids who have grown up with computers.

Steve King


And here you use "input" as a verb. Surely it would be better to say
"the way they put data into computers".

d

[William Sommerwerck]

I recently read that younger people are referring to
the way they input data on computers and phones

"Enter" data, not "input" it. Why create a new usage when existing words are
fine?

as "keying". Supposedly it came from really young
kids who have grown up with computers.

"Keying" might just as well have come from typists.

[Bill Graham]

Don Pearce wrote:
On Thu, 30 Jun 2011 00:58:06 -0500, "Steve King"
wrote:

"Ed Anson" wrote in message
...
On 6/29/11 2:53 PM, Frank wrote:
P.S. Another one that bothers me is people with camcorders who say
that they're "filming".

If they were using a film-based motion picture camera, then the
term "filming" would be appropriate, but when using a camcorder,
they're "shooting video", not "filming", at least as far as I'm
concerned.

So I suppose you would also object to someone saying he is
"dialing" a telephone. Telephones haven't had dials in decades. I
wonder what we should say instead?

I recently read that younger people are referring to the way they
input data on computers and phones as, "Keying". Supposedly it came
from really young kids who have grown up with computers.

Steve King


And here you use "input" as a verb. Surely it would be better to say
"the way they put data into computers".

d

Isn't "keying" what locksmiths do?

[Richard Webb[_3_]]

Don Pearce writes:
So I suppose you would also object to someone saying he is "dialing" a
telephone. Telephones haven't had dials in decades. I wonder what we
should say instead?

FUnny, but the act ot entering numbers into a communications device which uses the phone lines is still "dialing" to me,
and to many.

I recently read that younger people are referring to the way they input data
on computers and phones as, "Keying". Supposedly it came from really young
kids who have grown up with computers.

And here you use "input" as a verb. Surely it would be better to say
"the way they put data into computers".

Maybe, but it's one of many words that can be both noun and
verb, since we're all waxing pedantic here. IF it's a label on your console or patchbay it's a noun.
tHe data the forecasters' modeling software uses to forecast the weather are inputs, also a noun. IF you unhderstand
what he means what difference does it make?

Richard
--
| Remove .my.foot for email
| via Waldo's Place USA Fidonet-Internet Gateway Site
| Standard disclaimer: The views of this user are strictly his own.

[Mike Rivers]

On 6/29/2011 12:53 PM, Frank wrote:

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

Why is that? And what's something round and flat that's not
a piece of computer hardware, like a phonograph record, or
something in your back that slips? And why?

--
"Today's production equipment is IT based and cannot be
operated without a passing knowledge of computing, although
it seems that it can be operated without a passing knowledge
of audio." - John Watkinson

http://mikeriversaudio.wordpress.com - useful and
interesting audio stuff

[Frank]

On Wed, 29 Jun 2011 17:14:25 -0400, in 'rec.audio.pro',
in article Will everyone stop saying tic,
Mike Rivers wrote:

On 6/29/2011 12:53 PM, Frank wrote:

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

Why is that?

In the case of the CD, it's because Philips and Sony decided that it
would be a "c" and not a "k". In the case of the hard disk drive (also
called a "fixed disk drive" by IBM when referring to their personal
computer) and the diskette, it's because IBM decreed it.

And what's something round and flat that's not
a piece of computer hardware, like a phonograph record,

That would be a disc, named after those Greek folks and the disci that
they were so fond of throwing.

or something in your back that slips? And why?

That would be a disc, but I don't wear slips any longer.

--
Frank, Independent Consultant, New York, NY
[Please remove 'nojunkmail.' from address to reply via e-mail.]
Read Frank's thoughts on HDV at http://www.humanvalues.net/hdv/
[also covers AVCHD (including AVCCAM & NXCAM) and XDCAM EX].

[Gareth Magennis]

"Frank" wrote in message
...
On Wed, 29 Jun 2011 17:14:25 -0400, in 'rec.audio.pro',
in article Will everyone stop saying tic,
Mike Rivers wrote:

On 6/29/2011 12:53 PM, Frank wrote:

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

Why is that?

In the case of the CD, it's because Philips and Sony decided that it
would be a "c" and not a "k". In the case of the hard disk drive (also
called a "fixed disk drive" by IBM when referring to their personal
computer) and the diskette, it's because IBM decreed it.

And what's something round and flat that's not
a piece of computer hardware, like a phonograph record,

That would be a disc, named after those Greek folks and the disci that
they were so fond of throwing.



The Greeks had their own alphabet., and their own unique way of pronouncing
it.
Discus is a Latin noun.

I tried throwing a discus at school once . It was a heavy chunk of wood
with a heavy metal surround, and I couldn't see the point of it at all.



Gareth.

[Frank]

On Thu, 30 Jun 2011 00:23:53 +0100, in 'rec.audio.pro',
in article Will everyone stop saying tic,
"Gareth Magennis" wrote:

"Frank" wrote in message
.. .
On Wed, 29 Jun 2011 17:14:25 -0400, in 'rec.audio.pro',
in article Will everyone stop saying tic,
Mike Rivers wrote:

On 6/29/2011 12:53 PM, Frank wrote:

A disk, as in a hard disk drive (HDD) or a floppy (flexible) diskette,
is magnetic.

A disc, as in a CD (Compact Disc), DVD, or BD (Blu-ray Disc), is
optical.

Why is that?

In the case of the CD, it's because Philips and Sony decided that it
would be a "c" and not a "k". In the case of the hard disk drive (also
called a "fixed disk drive" by IBM when referring to their personal
computer) and the diskette, it's because IBM decreed it.

And what's something round and flat that's not
a piece of computer hardware, like a phonograph record,

That would be a disc, named after those Greek folks and the disci that
they were so fond of throwing.



The Greeks had their own alphabet.,

I believe that they still do, even when busy rioting in the street.

and their own unique way of pronouncing it.

They speak with a Greek accent, I would assume.

Discus is a Latin noun.

discus
n pl discuses, disci
from Latin, from Greek diskos from dikein to throw

I tried throwing a discus at school once . It was a heavy chunk of wood
with a heavy metal surround, and I couldn't see the point of it at all.

You should have tried archery.

--
Frank, Independent Consultant, New York, NY
[Please remove 'nojunkmail.' from address to reply via e-mail.]
Read Frank's thoughts on HDV at http://www.humanvalues.net/hdv/
[also covers AVCHD (including AVCCAM & NXCAM) and XDCAM EX].

[geoff]

"Gareth Magennis" wrote in message
...

I tried throwing a discus at school once . It was a heavy chunk of wood
with a heavy metal surround, and I couldn't see the point of it at all.


It was round - it didn't have a pouint. That's a javellin.

And I guess you didn't throw furtherest then, or is that farthest ?

geoff