[[email protected]]

I posted this once before to get some opinions but the thread got
hijacked.
Thought I'd try again and add high-end to see if anyone over there
might
have advice. I got a behringer 8024 equalizer I wanted to play around
with.
I'm still waiting for a mic cable I ordered before experimenting so I
have
not done anything yet. I'm not interested in hearing about the
pro/cons/flaws/etc in attempting to equalize a room, thanks but please
take it elsewhere.

I'm using a technics surround sound processor (sh-ac500d) as a pre-
amp /
input selector. All my inputs to it are digital. It also is my
volume
control. The logical place to put the equalizer is after it of
course. But
that will be in the attenuated signal. I'm wondering if this is an
issue
because the behringer converts to digital internally? I'm using an
active
crossover with a couple adcoms downstream so I don't have any other
good
alternative volume controls.