Home |
Search |
Today's Posts |
|
#1
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]()
Since much has been written about the pros and cons of Behringer equipment I
wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. |
#2
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Peter wrote: Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical sic 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? |
#3
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Peter wrote: Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. Given the price of the unit it is obvious it is targeted at garage bands and storefront churches. When you undercut HUartley Peavey...... Graphic EQ if properly implemented can be a good thing in a reproduction setup but parametric EQ is much more useful. It is expensive, see the Manley Massive Passive for an idea...and bear in mind that's one channel. |
#4
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Bret Ludwig wrote: Peter wrote: Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. Given the price of the unit it is obvious it is targeted at garage bands and storefront churches. When you undercut HUartley Peavey...... Graphic EQ if properly implemented can be a good thing in a reproduction setup but parametric EQ is much more useful. It is expensive, see the Manley Massive Passive for an idea...and bear in mind that's one channel. You're suggesting that a high price = audio quality ? Graham |
#5
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() "Peter" reply to newsgroup only wrote in message . .. Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. I've seen good and bad reports on this piece of equipment. If you desire an EQ, and are on limited budget this unit along with their mic. would be a place to start. A better unit would be one from Rane, and from there you can go up substantially in price. If you have a room that only need a minor bit of correction the Behringer will likely suffice. Many rooms have a bass bump around 50-100 Hz and this unit will probably take care of that. One of the drawbacks of less expensive units like this is that they generally aren't exactly locked in on the bands they say they are, but IIRC you can adjust those, so perhaps with a bit of time you can get decent results. You can do better but it will cost you substantially more. |
#6
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() |
#7
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() "Pooh Bear" wrote in message ... wrote: A better unit would be one from Rane, What would be *better* about it ? Graham From what I've been told, the center frequency controls are more accurate and there is a better build quality. |
#8
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() "Peter" reply to newsgroup only wrote in message . .. Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. There ain't no such thing as "Swiss Alps" potentiometers. Alps is headquartered in Japan. http://www.alps.com/network/japan.html Alps has a number of credible competitors. When the Behringer publicity machine starts ranting about Alps potentiomenters, lots of people roll their eyes. Not that there isn't anything necessarily wrong with Alps, its just that they make cost-effective and high end product lines like lots of other people. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. Nor do I - I haven't bought one, and probablyn never will. I do have some Behringer equipment and its worth at least what I paid for it. If I had a piece of equipment that I beat the dickens out of, I might not buy Behringer or I would buy Behringer for sure, depending on how earlier replacement would fit into my strategy. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Using audio production type signal processors in home audio applications has some exposures, no matter who makes it. There are two more-or-less standards for input and output voltages. One is called consumer and the other is called professional. There's about 11 dB difference between them, which means that a piece of consumer gear used for audio production could end up clipping, and a piece of professional gear used for home audio could end up being noisy. There's a lot of gear that is considered to be either consumer or professional that works fine in the other role, and a little that does not. FWIW the Behringer parametric equalizer that I have has more than enough dynamic range and works well in either application. Some old Rane parametrics that I have don't have enough dynamic range for dual use, and are a tad noisy in consumer situations. I have other newer Rane equalizers work fine in either situation. So you see, spending more money doesn't guarantee good performance, and spending less doesn't guarantee poorer performance. |
#9
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Arny Krueger wrote: There ain't no such thing as "Swiss Alps" potentiometers. Alps is headquartered in Japan. http://www.alps.com/network/japan.html Alps has a number of credible competitors. When the Behringer publicity machine starts ranting about Alps potentiomenters, lots of people roll their eyes. Not that there isn't anything necessarily wrong with Alps, its just that they make cost-effective and high end product lines like lots of other people. Penny and Giles is the name to look for. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. We aren't talking Jensen 990s at this price point! I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Using audio production type signal processors in home audio applications has some exposures, no matter who makes it. There are two more-or-less standards for input and output voltages. One is called consumer and the other is called professional. There's about 11 dB difference between them, which means that a piece of consumer gear used for audio production could end up clipping, and a piece of professional gear used for home audio could end up being noisy. Matching transformers. They're a wonderful thing. |
#10
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Bret Ludwig wrote: Arny Krueger wrote: Using audio production type signal processors in home audio applications has some exposures, no matter who makes it. There are two more-or-less standards for input and output voltages. One is called consumer and the other is called professional. There's about 11 dB difference between them, which means that a piece of consumer gear used for audio production could end up clipping, and a piece of professional gear used for home audio could end up being noisy. Well not especially noisy to be honest. Matching transformers. They're a wonderful thing. They're hugely expesive. And non-linear. Changing a couple of resistor values inside the unit makes more sense if you know how to. Graham |
#11
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Pooh Bear wrote: snip They're hugely expesive. And non-linear. They are not hugely expensive and they are very linear when operated inside their design parameters. They also generally last forever in small signal applications. Changing a couple of resistor values inside the unit makes more sense if you know how to. It depends on the type of output circuit and may be listed in the service manual as an approved mod for good results....oops, there probably are no service manuals on Behringers. |
#12
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Bret Ludwig wrote: Pooh Bear wrote: snip They're hugely expesive. And non-linear. They are not hugely expensive and they are very linear when operated inside their design parameters. They also generally last forever in small signal applications. You must have a different idea of expensive to me. Graham |
#13
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() "Bret Ludwig" wrote in message oups.com... Pooh Bear wrote: snip They're hugely expesive. And non-linear. They are not hugely expensive and they are very linear when operated inside their design parameters. Transformers are fairly nonlinear compared to the common alternatives, which are IC's and passive parts. Furthermore, they generally introduce frequency response limitations. Today, audio transformers are often used to impart a characteristic sound. They also generally last forever in small signal applications. So do lots of things. Changing a couple of resistor values inside the unit makes more sense if you know how to. Agreed. It depends on the type of output circuit and may be listed in the service manual as an approved mod for good results....oops, there probably are no service manuals on Behringers. Usually you can generate the required small section of the schematic from the circuit card. |
#14
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]()
In article ,
"Peter" reply to newsgroup only wrote: Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. Feedback Detection isn't much use in home stereo. Just glancing at the website shows the Ultra-Curve Pro DEQ2496 for "audiophile mastering." Go digital. Stephen |
#15
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Peter wrote: According to the company literature this Equalizer incorporates Swiss Alps potentiometers, LMAO ! No - that means *ALPS* potentiometers. The name of the company that makes them is Alps ( in Japan ) - nothing to do with Switzerland at all. Graham |
#16
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() Peter wrote: Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. It'll be fine. Hi-fi gear snobs might disagree but they all have their heads stuck up their asses. I'd ignore them. Graham |
#17
![]()
Posted to rec.audio.opinion
|
|||
|
|||
![]() "Peter" reply to newsgroup only wrote in message . .. Since much has been written about the pros and cons of Behringer equipment I wonder if anyone might be willing to comment about a specific Behringer component, namely the Ultragraph Pro FBQ6200 Ultra-Musical 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System, Behringer's "top-of-the-line" equalizer? According to the company literature this Equalizer incorporates Swiss Alps potentiometers, which surely have a good reputation, and it also features a relay operated "hard" bypass, in order to permit instant comparison between the equalized vs. the unequalized signal. Unfortunately I have no idea about the quality, or sound, of the op amps used in this Behringer equalizer. I do not intend to use this equalizer in a professional recording setup, but rather for a home stereo system in order to hopefully adjust the system's response in order to cope with certain room anomalies. Thank you very much for your kind consideration and comments. A better choice, assuming you want tostay with Behringer is the DEQ 2496. For whatit costs and whatit does, it's very much better than might be expected and digital EQ is generally considered a better way to go. |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Behringer FBQ6200 31 Band Stereo Graphic Equalizer | Pro Audio | |||
Note to Trevor | Audio Opinions | |||
Behringer - Very Disturbing Article | Pro Audio | |||
Behringer Products | Pro Audio | |||
BEHRINGER VAMPIRE, Great !!! Nice Price | Pro Audio |