Is anybody using this little thingy.For less then $200 too.

Rob

Rob O. wrote:

Is anybody using this little thingy.For less then $200 too.

I've tested it out. It performs well in most respects, but the way its
gain control circuit is set up, the low-frequency response depends on the
gain setting, and that really shouldn't be the case. As I recall (there's
a message here within the past year in which I posted my exact measurement
results), there were rather significant losses--3 to 5 dB down, maybe--at
the higher end of the gain range. (cf. "Google Groups Search")

Perhaps a simple capacitor substitution would fix that problem, though.

In article writes:

I've tested it out. It performs well in most respects, but the way its
gain control circuit is set up, the low-frequency response depends on the
gain setting, and that really shouldn't be the case.

The "world class" Mackie XDR preamps are the same way.

Perhaps a simple capacitor substitution would fix that problem, though.

It would, in the case of the Mackie, but it's not so simple because
there just isn't room for it. The designer designed it right but when
it came down to the "we can't sell it if it costs that much, you have
to cut something" that's what got cut. The rationalization (my words,
not Mackie's, who don't have any on the subject) is that with the gain
wide open, chances are there's going to be some low frequency ambient
noise that you're going to want to cut anyway. And at normal
rock-and-roll into-the-mic levels, the low frequency response is all
there. So in practice (and this may well be the case with the Rane
too) it isn't as bad as you'd like it to look.



--
I'm really Mike Rivers - )

Mike Rivers wrote:

The rationalization (my words,
not Mackie's, who don't have any on the subject) is that with the gain
wide open, chances are there's going to be some low frequency ambient
noise that you're going to want to cut anyway. And at normal
rock-and-roll into-the-mic levels, the low frequency response is all
there. So in practice (and this may well be the case with the Rane
too) it isn't as bad as you'd like it to look.

So just don't buy any ribbon mics? g Because there it sounds worse
than I'd like it to sound, Mackie-wise.

--
hank alrich * secret mountain
audio recording * music production * sound reinforcement
"If laughter is the best medicine let's take a double dose"

In article writes:

So just don't buy any ribbon mics? g Because there it sounds worse
than I'd like it to sound, Mackie-wise.

People who use ribbon mics wouldn't be caught dead with a Mackie just
on general principles (or at least shouldn't). Kind of like mixing 50
year old Scotch with Coca Cola.



--
I'm really Mike Rivers - )

Mike Rivers wrote:
People who use ribbon mics wouldn't be caught dead with a Mackie just
on general principles (or at least shouldn't).

not even with a decent mic pre?

Kind of like mixing 50 year old Scotch with Coca Cola.

except you don't "use up" a mic or mixer by hooking them to eachother.

--
Aaron J. Grier | "Not your ordinary poofy goof." |
"Isn't an OS that openly and proudly admits to come directly from Holy
UNIX better than a cheap UNIX copycat that needs to be sued in court
to determine what the hell it really is?" -- Michael Sokolov

Apparently, Roger Nichols likes it

http://www.musicgearnetwork.com/ubb/...c;f=2;t=005400


"robo" wrote in message
om...
Is anybody using this little thingy.For less then $200 too.

Rob

In article znr1057525719k@trad, Mike Rivers wrote:
In article writes:

So just don't buy any ribbon mics? g Because there it sounds worse
than I'd like it to sound, Mackie-wise.

People who use ribbon mics wouldn't be caught dead with a Mackie just
on general principles (or at least shouldn't). Kind of like mixing 50
year old Scotch with Coca Cola.

Sadly it happens to me a lot.
But the M-500 works surprisingly well into a Mackie. You can hear an example
on the penultimate RAP CD compilation. I find that going into a 1:1:1
transformer splitter unit actually improves the sound of ribbons a lot when
the PA console is a Mackie, although it doesn't do anything to improve the
noise floor.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

In article writes:

Mike Rivers wrote:
People who use ribbon mics wouldn't be caught dead with a Mackie just
on general principles (or at least shouldn't).

not even with a decent mic pre?

You mean putting a decent mic preamp into the Mackie? Or going
straight to the recorder through decent mic preamps and leaving the
Mackie for monitoring? Not quite sure what you're getting at here.
Maybe you're making too much of my statement. Ribbon mics as a rule
(and yeah, I know that there's at least one powered ribbom mic to
which this doesn't apply) have fairly low sensitivity, so for a given
SPL, require more gain than other mics. And I think it was in this
thread that I mentioned that the Mackie front end loses low frequency
response when you run it wide open.

Kind of like mixing 50 year old Scotch with Coca Cola.
except you don't "use up" a mic or mixer by hooking them to eachother.

You do if you're recording a live performance that won't happen again.

Is this "Beat on Mike because he doesn't present a lab notebook with
every statement" week again? I guess I haven't had a turn for a
while.


--
I'm really Mike Rivers - )

Mike Rivers wrote:
In article writes:

Mike Rivers wrote:
People who use ribbon mics wouldn't be caught dead with a Mackie
just on general principles (or at least shouldn't).

not even with a decent mic pre?

You mean putting a decent mic preamp into the Mackie?

yes.

Or going straight to the recorder through decent mic preamps and
leaving the Mackie for monitoring?

that too.

Not quite sure what you're getting at here.

if the mackie pre-amps are completely bypassed, am I wasting my time and
efforts in acquiring a ribbon microphone to run through my RNP and 1202?

--
Aaron J. Grier | "Not your ordinary poofy goof." |
"Isn't an OS that openly and proudly admits to come directly from Holy
UNIX better than a cheap UNIX copycat that needs to be sued in court
to determine what the hell it really is?" -- Michael Sokolov

Scott Dorsey wrote:

But the M-500 works surprisingly well into a Mackie.

This is true IME. Not so the M260, M160, or my M360. I'm just gonna
assume we don't want to try an M130.

--
hank alrich * secret mountain
audio recording * music production * sound reinforcement
"If laughter is the best medicine let's take a double dose"

Aaron J. Grier wrote:

if the mackie pre-amps are completely bypassed, am I wasting my time and
efforts in acquiring a ribbon microphone to run through my RNP and 1202?

I don't think so, but I also think I would route from the RNP straight
into storage, using the Mackie only for monitoring when necessary.

--
hank alrich * secret mountain
audio recording * music production * sound reinforcement
"If laughter is the best medicine let's take a double dose"