Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I know it is not recommended to play guitars thru hi-fi speakers, but
does it help or protect the speakers better if the guitar is run thru a effects proccessor that has equalizers and built in mixers and the likes. Im refering to a Digitech pre-amp effects processor into a kenwood reciever into home stereo speakers. I have hi-effecient speakers and regular high power speakers, if it makes a difference on which to use. Any input would greatly be appreciated. Bryan Dibble |
#2
![]() |
|||
|
|||
![]() |
#3
![]() |
|||
|
|||
![]() |
#4
![]() |
|||
|
|||
![]()
Bryan Dibble wrote:
I know it is not recommended to play guitars thru hi-fi speakers, but does it help or protect the speakers better if the guitar is run thru a effects proccessor that has equalizers and built in mixers and the likes. Im refering to a Digitech pre-amp effects processor into a kenwood reciever into home stereo speakers. I have hi-effecient speakers and regular high power speakers, if it makes a difference on which to use. Any input would greatly be appreciated. Bryan Dibble In addition to the previous posts - be very aware that guitars can produce a lot of treble that may 'fry' a hi-fi tweeter - even if it sounds like the rest of the system can take it. In that respect a processor may even make things worse. Why not buy a cheap practice amp ? Graham |
#5
![]() |
|||
|
|||
![]()
Pooh Bear wrote in message ...
Bryan Dibble wrote: I know it is not recommended to play guitars thru hi-fi speakers, but does it help or protect the speakers better if the guitar is run thru a effects proccessor that has equalizers and built in mixers and the likes. Im refering to a Digitech pre-amp effects processor into a kenwood reciever into home stereo speakers. I have hi-effecient speakers and regular high power speakers, if it makes a difference on which to use. Any input would greatly be appreciated. Bryan Dibble In addition to the previous posts - be very aware that guitars can produce a lot of treble that may 'fry' a hi-fi tweeter - even if it sounds like the rest of the system can take it. In that respect a processor may even make things worse. Why not buy a cheap practice amp ? Graham why don't wailing leads in music fry tweeters then? |
#6
![]() |
|||
|
|||
![]() |
#7
![]() |
|||
|
|||
![]() |
#9
![]() |
|||
|
|||
![]()
Bryan Dibble wrote:
Pooh Bear wrote in message ... In addition to the previous posts - be very aware that guitars can produce a lot of treble that may 'fry' a hi-fi tweeter - even if it sounds like the rest of the system can take it. In that respect a processor may even make things worse. Why not buy a cheap practice amp ? why don't wailing leads in music fry tweeters then? Because the music you play has been pretty limited and processed, and does not have the occasional sharp transient that damages speakers. Even so, if you played them at concert stage levels, most home system tweeters would not last more than a minute or so. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#10
![]() |
|||
|
|||
![]() In article , (Bryan Dibble) wrote: Pooh Bear wrote in message ... Bryan Dibble wrote: I know it is not recommended to play guitars thru hi-fi speakers, but does it help or protect the speakers better if the guitar is run thru a effects proccessor that has equalizers and built in mixers and the likes. Im refering to a Digitech pre-amp effects processor into a kenwood reciever into home stereo speakers. I have hi-effecient speakers and regular high power speakers, if it makes a difference on which to use. Any input would greatly be appreciated. Bryan Dibble In addition to the previous posts - be very aware that guitars can produce a lot of treble that may 'fry' a hi-fi tweeter - even if it sounds like the rest of the system can take it. In that respect a processor may even make things worse. Why not buy a cheap practice amp ? Graham why don't wailing leads in music fry tweeters then? "most"recorded music is compressed and bandwithlimited it is got the dynamic range of a lead slug but don't take our word for it I encourage you to do it yourself another neat trick to get HUGE volume out of home hi-fi is to run your speaker outputs into the aux input on a second reciever then hook your speakers to this second reciever you can boost the output by at least 10 times the wattage George No you can't, but you know that. I'm sure that this was an attempt at backhanded humor. Richard H. Kuschel "I canna change the law of physics."-----Scotty |
#11
![]() |
|||
|
|||
![]()
In article ,
(Richard Kuschel) wrote: In article , (Bryan Dibble) wrote: Pooh Bear wrote in message ... Bryan Dibble wrote: I know it is not recommended to play guitars thru hi-fi speakers, but does it help or protect the speakers better if the guitar is run thru a effects proccessor that has equalizers and built in mixers and the likes. Im refering to a Digitech pre-amp effects processor into a kenwood reciever into home stereo speakers. I have hi-effecient speakers and regular high power speakers, if it makes a difference on which to use. Any input would greatly be appreciated. Bryan Dibble In addition to the previous posts - be very aware that guitars can produce a lot of treble that may 'fry' a hi-fi tweeter - even if it sounds like the rest of the system can take it. In that respect a processor may even make things worse. Why not buy a cheap practice amp ? Graham why don't wailing leads in music fry tweeters then? "most"recorded music is compressed and bandwithlimited it is got the dynamic range of a lead slug but don't take our word for it I encourage you to do it yourself another neat trick to get HUGE volume out of home hi-fi is to run your speaker outputs into the aux input on a second reciever then hook your speakers to this second reciever you can boost the output by at least 10 times the wattage George No you can't, but you know that. I'm sure that this was an attempt at backhanded humor. some time around 1979 I did do that, just before I called the fire department ;-o George |
#12
![]() |
|||
|
|||
![]()
I encourage you to do it yourself
another neat trick to get HUGE volume out of home hi-fi is to run your speaker outputs into the aux input on a second reciever then hook your speakers to this second reciever you can boost the output by at least 10 times the wattage George No you can't, but you know that. I'm sure that this was an attempt at backhanded humor. some time around 1979 I did do that, just before I called the fire department ;-o George I meant you can't increase the wattage. You will get tons of distortion and raise holy ned with the speakers, but gain does not increase the amplifier's power. Richard H. Kuschel "I canna change the law of physics."-----Scotty |
#13
![]() |
|||
|
|||
![]() |
#14
![]() |
|||
|
|||
![]()
another neat trick to get HUGE volume out of home hi-fi is to run your
speaker outputs into the aux input on a second reciever then hook your speakers to this second reciever you can boost the output by at least 10 times the wattage LOL! But seriously, kids will try anything. One of my 60s bandmates, in a failed attempt to keep up with my mighty (and truly a piece of crap) US-made Vox Super Beatle, would plug the speaker out of his Bandmaster into the input of another Bandmaster. None of us could figure out why it didn't ever seem to be any louder than just one Bandmaster. The things you do when you're 16 years old... Scott Fraser |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Guitars, Amps, Keyboards, Pianos, Drums, Recording, DJ, Band, Orchestra, SheetMusic, Brass, Live Sound, Software, Latin, electronic | Marketplace | |||
Right choice of wood for speakers | Tech | |||
mixing three electric guitars | Pro Audio | |||
Simple question for trotsky | Audio Opinions | |||
speakers for PA system | Pro Audio |