Kev
April 14th 04, 06:50 PM
I recently bought a Yamaha 5640 receiver along with a pair of Polkaudio RTi8
(Front Main) and a pair of Quest QB6 (Rear Surround). I am so amazed by this
setup.
Simply connected, the sound was already amazing, but the BASE is a little
bit poor. After some try, I figure out, that I don't have a subwoofer, and
the Lower frequency is directed to subwoofer output by default. So I should
let the receiver know there's no subwoofer.
My final config on the receiver is:
Speakers: 4 Speaker (Factory defualt is
5.1)
Subwoofer: No (Factory defualt is
"Yes")
Rear Surround: Large (Default is "Small")
Low Freq out: Main Speaker (Defualt is "Subwoofer",
another choice is "BOTH")
Welcome to any better suggestion!
Kevin
(Front Main) and a pair of Quest QB6 (Rear Surround). I am so amazed by this
setup.
Simply connected, the sound was already amazing, but the BASE is a little
bit poor. After some try, I figure out, that I don't have a subwoofer, and
the Lower frequency is directed to subwoofer output by default. So I should
let the receiver know there's no subwoofer.
My final config on the receiver is:
Speakers: 4 Speaker (Factory defualt is
5.1)
Subwoofer: No (Factory defualt is
"Yes")
Rear Surround: Large (Default is "Small")
Low Freq out: Main Speaker (Defualt is "Subwoofer",
another choice is "BOTH")
Welcome to any better suggestion!
Kevin