5.1 input to receiver wo 5.1in

[noone]

I want to get my dvd 5.1 output to my 5.1 speakers. The receiver doesn't
have any 5.1 input only 2 channel input. Is this possible? DVD player has
5.1 cable & optical output , receiver has 5.1 speaker output but no 5.1
cable/optical input only 2 channel input. Is it possible to get the dvd's
5.1 output routed thru and to the proper speakers going thru the receiver?

[Kalman Rubinson]

On Mon, 06 Oct 2003 01:08:07 GMT, noone > wrote:

>I want to get my dvd 5.1 output to my 5.1 speakers. The receiver doesn't
>have any 5.1 input only 2 channel input. Is this possible? DVD player has
>5.1 cable & optical output , receiver has 5.1 speaker output but no 5.1
>cable/optical input only 2 channel input. Is it possible to get the dvd's
>5.1 output routed thru and to the proper speakers going thru the receiver?

No. You can have the DVD player downmix 5.1 to 2 channels for your
receiver. However, if you only have a 2 channel receiver, that's all
it is: 2 channels.

Kal

[trotsky]

Kalman Rubinson wrote:
> On Mon, 06 Oct 2003 01:08:07 GMT, noone > wrote:
>
>
>>I want to get my dvd 5.1 output to my 5.1 speakers. The receiver doesn't
>>have any 5.1 input only 2 channel input. Is this possible? DVD player has
>>5.1 cable & optical output , receiver has 5.1 speaker output but no 5.1
>>cable/optical input only 2 channel input. Is it possible to get the dvd's
>>5.1 output routed thru and to the proper speakers going thru the receiver?
>
>
> No. You can have the DVD player downmix 5.1 to 2 channels for your
> receiver. However, if you only have a 2 channel receiver, that's all
> it is: 2 channels.



MSB probably still does mods to allow for such an input, but I doubt
it's cost effective unless he's got a very expensive receiver.

[Gary A. Edelstein]

On Mon, 06 Oct 2003 01:08:07 GMT, noone > wrote:

>I want to get my dvd 5.1 output to my 5.1 speakers. The receiver doesn't
>have any 5.1 input only 2 channel input. Is this possible? DVD player has
>5.1 cable & optical output , receiver has 5.1 speaker output but no 5.1
>cable/optical input only 2 channel input. Is it possible to get the dvd's
>5.1 output routed thru and to the proper speakers going thru the receiver?
>
Sounds like you have an older A/V receiver that only does Dolby Pro
Logic, so no, you can't use an analog 5.1 output nor the digital
optical audio out with it. You can only the 2 channel stereo analog
output, which will give you Dolby Surround with most DVDs, which your
DPL decoder can handle. If you want to use the digital audio out for
DD or DTS, then you need to get a new receiver. Gary E

|Gary A. Edelstein
(remove NO SPAM and .invalid to reply)
|"We have met the enemy and he is us." - Walt Kelly's Pogo