[PenttiL]

I'm pretty new with this tool and I need to assingn some channels to
talkback channels. This is connect to studio monitors. One goes to omni
5. I've tried to feed from channels to omni 5 some busses and auxes, but
not manage with this. How does this will happen right way?

How it is generally possible to assign signals after input channels to
omni outs?

-Pentti

[PenttiL]

PenttiL wrote:
I'm pretty new with this tool and I need to assingn some channels to
talkback channels. This is connect to studio monitors. One goes to omni
5. I've tried to feed from channels to omni 5 some busses and auxes, but
not manage with this. How does this will happen right way?

How it is generally possible to assign signals after input channels to
omni outs?

-Pentti

Here's also a manual, but I didn't easy solve my problem with this:

http://www.rdlx.com/DM1000%20Manual.pdf

-Pentti

[PenttiL]

Here's also a manual, but I didn't easy solve my problem with this:

http://www.rdlx.com/DM1000%20Manual.pdf

-Pentti

I found myself the right way to do this. Aux 5 is presetted for this
purpose as the directions told on yhe screen. Wonder why this didin't
work first...

Thanks, the DM 1000 is a nice tool ( again...;-) ) !

-P