Home |
Search |
Today's Posts |
#1
Posted to alt.comp.periphs.cdr,rec.audio.pro,comp.publish.cdrom.hardware
|
|||
|
|||
MagicCopy Duplicator 52x32x52 PC Connection?
I have a MagicCopy 52x32x52 cd duplicator. I used to have a similar
model but which had a way to connect it to a pc. Is there anyway to connect the model I have to a pc? |
#2
Posted to alt.comp.periphs.cdr,rec.audio.pro,comp.publish.cdrom.hardware
|
|||
|
|||
MagicCopy Duplicator 52x32x52 PC Connection?
In article .com, Justin Goldberg wrote: I have a MagicCopy 52x32x52 cd duplicator. I used to have a similar model but which had a way to connect it to a pc. Is there anyway to connect the model I have to a pc? Probably. You have to determine the actual manufacturer of the duplicator controller board inside, and see if an IDE-to-USB daughter board is available. They usually run about $40 US. Popular controller boards carry brand names like Acard, Athena, Apollo, etc. You can often figure it out by comparing the appearance of the front panel (type, layout, position, configuration of the LCD display and control buttons) and comparing it with known models at the manufacturers' websites (or those of dealers that make reference to the actual board manufacturer rather than names like "MagicCopy"). |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Video DVD Duplicator | Pro Audio | |||
Video DVD Duplicator | Pro Audio | |||
building a duplicator | Pro Audio | |||
FS: 1 to 3 CD duplicator, $200 | Pro Audio | |||
CD Duplicator Recommendations | Pro Audio |