[Eeyore]

There was part of a thread a while back about how adding negative feedback can
create higher order harmonic distortion products than exist open-loop in an
amplifier stage.

This made me think about the application of op-amps in audio generally. Negative
feedback is used primarily to linearise the transfer function and is used in
huge quantites as much as 80dB @ 1 kHz for example.

Since this amount of NFB is not required to provide an accurate gain setting, it
struck me that it's somewhat counter productive. If instead the open-loop
transfer characteritic was made more linear by degeneration of the open-loop
gain for example, when NFB is applied, the overall result should be largely
similar (i.e. no worse) but would presumably also suffer less from the creation
of these new distortion products .

Comments ?

Graham