Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.bicycles.misc,alt.true-crime,rec.audio.opinion,sci.skeptic,rec.photo.digital
Jobst Brandt Jobst Brandt is offline
external usenet poster
 
Posts: 1
Default Planet Bike Freddy Fenders tough to mount

On Mon, 23 Jul 2007 21:44:13 -0400, Gooserider wrote:

I was having difficulty getting tire clearance with my fender/tire
combination. I finally managed to rig it with a combination of three hands
and zip ties. The bike is a 2007 Surly Pacer, and tolerances were tight.
Planet Bike is a good company, makes good products, and gives money back to
cycling organizations. That's fine. But their fender mounting system could
be much better. The problem, as I see it, is with the separate clip they use
to mount to the brake bridge. It's difficult to put pressure on the clip to
get the fender up while tightening the brake bolt. It would be much easier
if the mounting tab was bolted to the fender, like SKS. My four zip tie
situation doesn't look like the most professional set up, but I have no rub.

Mike


As tough to mount as this? http://tinyurl.com/bby7q

Jobst Brandt
  #2   Report Post  
Posted to rec.bicycles.misc,alt.true-crime,rec.audio.opinion,sci.skeptic,rec.photo.digital
[email protected] DanKMTB@gmail.com is offline
external usenet poster
 
Posts: 4
Default Planet Bike Freddy Fenders tough to mount

On Jul 24, 1:06 am, Jobst Brandt
wrote:
On Mon, 23 Jul 2007 21:44:13 -0400, Gooserider wrote:
I was having difficulty getting tire clearance with my fender/tire
combination. I finally managed to rig it with a combination of three hands
and zip ties. The bike is a 2007 Surly Pacer, and tolerances were tight.
Planet Bike is a good company, makes good products, and gives money back to
cycling organizations. That's fine. But their fender mounting system could
be much better. The problem, as I see it, is with the separate clip they use
to mount to the brake bridge. It's difficult to put pressure on the clip to
get the fender up while tightening the brake bolt. It would be much easier
if the mounting tab was bolted to the fender, like SKS. My four zip tie
situation doesn't look like the most professional set up, but I have no rub.


Mike


As tough to mount as this? http://tinyurl.com/bby7q

Jobst Brandt


Fair warning to everyone else: That link is not safe for work,
children, national security, keeping your lunch down, or keeping with
your usual persona of not wishing serious bodily harm to other
people. If you're at home, with the with no children in sight, and
are OK with eating in reverse and wishing grave bodily harm to the
leech who posted the link, click away.

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Freddy Fender R.I.P. Six String Stu Pro Audio 1 October 15th 06 03:56 AM
mp3 bike set up deauville rider Car Audio 5 October 18th 05 09:02 PM
bike system deauville rider Car Audio 4 September 24th 05 02:28 AM
tubular tough talk Birchy Vacuum Tubes 0 January 26th 05 11:30 PM
Pro group looking for tough reliable good sounding mics... P.W. Felch Pro Audio 7 January 5th 05 03:16 AM


All times are GMT +1. The time now is 03:00 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"