Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.opinion
jeffc[_2_] jeffc[_2_] is offline
external usenet poster
 
Posts: 15
Default Room acoustics

I'm searching for a new house to live in, and one of the criteria is a nice
room to be used as a dedicated stereo room (2 channel). I'm looking at one
house that doesn't have a room yet, but has the space for it. It's a
prewired for power and prevented for HVAC. Basically an unfinished bonus
room over the garage.

The problem is, it's not exactly a rectangle shape. Although it is
symmetrical. But I just don't know how the shape of the room might affect
the acoustics. Basically it has 2 rafters that would jut below the ceiling
at one end of the room (this could be either the listening end or speaker
end). I don't have photos, which I could get next time I look at the house,
but in the meantime is there a starting point for me to learn more about the
negative (or positive) affects of these sorts of room idiosynchrasies?


  #2   Report Post  
Posted to rec.audio.opinion
MiNe 109 MiNe 109 is offline
external usenet poster
 
Posts: 3,597
Default Room acoustics

In article ,
"jeffc" wrote:

I'm searching for a new house to live in, and one of the criteria is a nice
room to be used as a dedicated stereo room (2 channel). I'm looking at one
house that doesn't have a room yet, but has the space for it. It's a
prewired for power and prevented for HVAC. Basically an unfinished bonus
room over the garage.

The problem is, it's not exactly a rectangle shape. Although it is
symmetrical. But I just don't know how the shape of the room might affect
the acoustics. Basically it has 2 rafters that would jut below the ceiling
at one end of the room (this could be either the listening end or speaker
end). I don't have photos, which I could get next time I look at the house,
but in the meantime is there a starting point for me to learn more about the
negative (or positive) affects of these sorts of room idiosynchrasies?


Try the FAQ at Cardas.

Stephen
  #3   Report Post  
Posted to rec.audio.opinion
Kalman Rubinson Kalman Rubinson is offline
external usenet poster
 
Posts: 312
Default Room acoustics

On Sun, 29 Apr 2007 20:57:50 -0400, "jeffc" wrote:

I'm searching for a new house to live in, and one of the criteria is a nice
room to be used as a dedicated stereo room (2 channel). I'm looking at one
house that doesn't have a room yet, but has the space for it. It's a
prewired for power and prevented for HVAC. Basically an unfinished bonus
room over the garage.

The problem is, it's not exactly a rectangle shape. Although it is
symmetrical. But I just don't know how the shape of the room might affect
the acoustics. Basically it has 2 rafters that would jut below the ceiling
at one end of the room (this could be either the listening end or speaker
end). I don't have photos, which I could get next time I look at the house,
but in the meantime is there a starting point for me to learn more about the
negative (or positive) affects of these sorts of room idiosynchrasies?


Nothing you have mentioned so far suggests any acoustical problems.
Dimensions and construction/materials are more important.

Kal
  #4   Report Post  
Posted to rec.audio.opinion
jeffc[_2_] jeffc[_2_] is offline
external usenet poster
 
Posts: 15
Default Room acoustics


"Kalman Rubinson" wrote in message
...
Basically it has 2 rafters that would jut below the ceiling
at one end of the room (this could be either the listening end or speaker
end). I don't have photos, which I could get next time I look at the
house,
but in the meantime is there a starting point for me to learn more about
the
negative (or positive) affects of these sorts of room idiosynchrasies?


Nothing you have mentioned so far suggests any acoustical problems.
Dimensions and construction/materials are more important.


Well, I wasn't very clear about the "rafters". Since they angle down, that
means the ceiling would slope downward to follow them. The rafters are
about 12" wide, so either they would jut below the ceiling, or the ceiling
would have to be installed a foot lower, to follow them rather than the
regular ceiling joists.


  #5   Report Post  
Posted to rec.audio.opinion
Arny Krueger Arny Krueger is offline
external usenet poster
 
Posts: 17,262
Default Room acoustics

"jeffc" wrote in message

I'm searching for a new house to live in, and one of the
criteria is a nice room to be used as a dedicated stereo
room (2 channel). I'm looking at one house that doesn't
have a room yet, but has the space for it. It's a
prewired for power and prevented for HVAC. Basically an
unfinished bonus room over the garage.
The problem is, it's not exactly a rectangle shape.


If its not a square, this may be good news.

Although it is symmetrical. But I just don't know how
the shape of the room might affect the acoustics.


Non-parallel walls are generally considered to be a good thing, within
reason.

Basically it has 2 rafters that would jut below the
ceiling at one end of the room (this could be either the
listening end or speaker end). I don't have photos,
which I could get next time I look at the house, but in
the meantime is there a starting point for me to learn
more about the negative (or positive) affects of these
sorts of room idiosynchrasies?


What ideosyncracy? Normal rafters in a room have negligable acoustical
properties. If anything they are diffusers, and generally speaking diffusion
outside the direct path for sound is a good thing. Worry about walls,
floors, and large flat expanses of ceiling.




  #6   Report Post  
Posted to rec.audio.opinion
Arny Krueger Arny Krueger is offline
external usenet poster
 
Posts: 17,262
Default Room acoustics

"jeffc" wrote in message

"Kalman Rubinson" wrote in message
...
Basically it has 2 rafters that would jut below the
ceiling at one end of the room (this could be either the
listening end or speaker end). I don't have photos,
which I could get next time I look at the house,
but in the meantime is there a starting point for me to
learn more about the
negative (or positive) affects of these sorts of room
idiosynchrasies?


Nothing you have mentioned so far suggests any
acoustical problems. Dimensions and
construction/materials are more important.


Well, I wasn't very clear about the "rafters". Since
they angle down, that means the ceiling would slope
downward to follow them. The rafters are about 12" wide,
so either they would jut below the ceiling, or the
ceiling would have to be installed a foot lower, to
follow them rather than the regular ceiling joists.


Sloped segments of ceiling are generally good. Cathedral ceilings generally
sound better than low, flat ceilings.


  #7   Report Post  
Posted to rec.audio.opinion
dizzy dizzy is offline
external usenet poster
 
Posts: 652
Default Room acoustics

jeffc wrote:

The problem is, it's not exactly a rectangle shape. Although it is
symmetrical.


That's a problem? The less cubic the room is, the better.

If the room is a conventional "rectangular" room, ideally the
dimensions vary by the golden ratio, i.e. with 8' height, a good width
would be 13' and the length 21". This reduces resonances, which are
an unfortunate fact of indoor audio, but are worst when
room-dimensions are the same or multiples of each other.

*The above pretty-much describes my listening room, and if anyone
thinks that I didn't notice and appreciate this before I bought the
house, they would be sadly mistaken. 8)

  #8   Report Post  
Posted to rec.audio.opinion
ScottW ScottW is offline
external usenet poster
 
Posts: 3,253
Default Room acoustics

On Apr 29, 5:57 pm, "jeffc" wrote:
I'm searching for a new house to live in, and one of the criteria is a nice
room to be used as a dedicated stereo room (2 channel). I'm looking at one
house that doesn't have a room yet, but has the space for it. It's a
prewired for power and prevented for HVAC. Basically an unfinished bonus
room over the garage.


I'd say your biggest issue is being over the garage unless you live
alone.
My room is over my garage and I'm very glad I thoroughly insulated the
floor
to limit sound from the garage.

ScottW

  #9   Report Post  
Posted to rec.audio.opinion
Kalman Rubinson Kalman Rubinson is offline
external usenet poster
 
Posts: 312
Default Room acoustics

On Sun, 29 Apr 2007 23:19:57 -0400, "jeffc" wrote:


"Kalman Rubinson" wrote in message
.. .
Basically it has 2 rafters that would jut below the ceiling
at one end of the room (this could be either the listening end or speaker
end). I don't have photos, which I could get next time I look at the
house,
but in the meantime is there a starting point for me to learn more about
the
negative (or positive) affects of these sorts of room idiosynchrasies?


Nothing you have mentioned so far suggests any acoustical problems.
Dimensions and construction/materials are more important.


Well, I wasn't very clear about the "rafters". Since they angle down, that
means the ceiling would slope downward to follow them. The rafters are
about 12" wide, so either they would jut below the ceiling, or the ceiling
would have to be installed a foot lower, to follow them rather than the
regular ceiling joists.


OK. Same comment.

Kal

  #10   Report Post  
Posted to rec.audio.opinion
jeffc[_2_] jeffc[_2_] is offline
external usenet poster
 
Posts: 15
Default Room acoustics


"dizzy" wrote in message
...
jeffc wrote:

The problem is, it's not exactly a rectangle shape. Although it is
symmetrical.


That's a problem? The less cubic the room is, the better.


Yes, basically I was saying I think a rectangle is better than a cube, but
it's not a rectangle - it's an odd shape, which makes it less predictable, I
guess.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
room acoustics [email protected] High End Audio 0 January 28th 07 07:13 PM
Room positioning and acoustics TJ Hertz Pro Audio 6 September 29th 05 03:52 PM
Room acoustics jeffc Audio Opinions 22 February 2nd 05 01:08 PM
Small room acoustics A. & G. Reiswig Pro Audio 13 April 9th 04 03:44 PM
room acoustics Pigdog General 0 August 30th 03 11:48 AM


All times are GMT +1. The time now is 02:39 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"