Home |
Search |
Today's Posts |
#1
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
So here's the deal. Over the past two years I've been collecting gear
on a very tight budget so I have mostly low-end stuff. I'm very eager to get serious with my ambitions of running my own studio and start buying professional-grade gear. Unfortunately, my budget hasn't changed much, so I have to choose everything very wisely and not over- spend or buy things that aren't adding much range to my setup. Here's my short gear list (I'm poor, don't laugh!): -Cubase SX 3.0 -Mix Wizard 16:2 -MOTU 896HD -Hamptone HJFP2, RNP -RNC, RNLA, Valley People Dynamite -AKG 414 XLS-II, (2) Rode NT5s, AT 4050, Neumann BCM 104 --(I want to sell this, if anyone's interested email me), Modded Oktava 219, 57's, 58's and SM52 (then some instruments and a few cheap FX pieces not worth mentioning) Right now I'm just recording a handful of rock bands but I'd like to have the flexibility to do other genres and one day mastering. So I have about $3000 to spend, here's what I'm thinking I should buy, tell me what you think: 1 more AKG 414 so that I can use them as a stereo pair for drum overheads or room mics and not have to be totally reliant on the NT5s. A Langevin DVC so I can have a good vocal pre as well as some good compressors along with it A TLM-103 or U87 if I can afford it to finally have a sure-fire vocal condenser mic. I'm thinking maybe just get another 4050 and use those as overheads/ field mics, keep the AKG 414 for vocals and save some dough for a nice intro ribbon mic or something. I don't know, I'm sure there are endless possibilities and I'd love to hear your opinions. Thanks. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
MB Quart Buying Advice | Car Audio | |||
What should my next piece of gear be? | Pro Audio | |||
are all your sudios equipped with this wonderful piece of gear? | Pro Audio | |||
Frustrated with latency: which piece of gear is the culprit? | Pro Audio | |||
Frustrated with latency: which piece of gear is the culprit? | Pro Audio |