[spud]

The shure site is useless. Can anyone explain how the switches work in
the back? Thank you, s.

[Don Pearce]

On Wed, 10 Jan 2007 11:50:34 -0800, spud wrote:

The shure site is useless. Can anyone explain how the switches work in
the back? Thank you, s.

The manual tells you exactly what they do

http://images.misupply.com/downloads/Shure/sm7b.pdf

d

--
Pearce Consulting
http://www.pearce.uk.com

--
Posted via a free Usenet account from http://www.teranews.com

[Scott Dorsey]

In article , spud spam wrote:
The shure site is useless. Can anyone explain how the switches work in
the back? Thank you, s.

There are three, as I recall... three bands, high middle and low, and they
can be set to boost, cut, or flat.

I also recall that it's not very useful to use the thing and I never found
a case where it was better than the console EQ. Just leave it flat and screw
the plate over it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Federico]

Two frequencies only.
Just bass cut and presence peak.
I sometimes use the lowcut when recording vocals with lips-on-mic technique.
You can see the same thing on the Red Hot Chili Peppers "Funk Monks" movie =
The making of Blood Sugar Sex Magic.
F.


There are three, as I recall... three bands, high middle and low, and they
can be set to boost, cut, or flat.

"C'est un Nagra. C'est suisse, et tres, tres precis."

[spud]

On Wed, 10 Jan 2007 20:00:27 GMT, (Don Pearce)
wrote:

On Wed, 10 Jan 2007 11:50:34 -0800, spud wrote:

The shure site is useless. Can anyone explain how the switches work in
the back? Thank you, s.

The manual tells you exactly what they do

http://images.misupply.com/downloads/Shure/sm7b.pdf

d

--

splendid, thank you.

Pearce Consulting
http://www.pearce.uk.com