Home |
Search |
Today's Posts |
#1
![]()
Posted to rec.audio.car
|
|||
|
|||
![]()
Ok so for the past few months I have been having a little issue with my
Kicker KX600.1 amp. A few months ago I noticed that the amp would click off after a a few minutes of use, then it would turn back on and be fine a few weeks, then it would do it again. So I figured that maybe the setting were set to high, so I adjusted them, but still the samething. My next thought was maybe it is over heating because it is summer, so I put a fan on it , and still nothing. Well flash forward to yesterday morning. I get in my car start driving, amp is fine, then out of the clear blue my sub stops working. I figured it would come back on in a few seconds, but to my surprise it didnt turn back on at all. I get home to see if maybe there is a loose wire somewhere, but nothing still dead . Next I unplug the sub and remote wire to see if maybe the wires were bad, nothing, but I did notice something odd. On the side of the amp there is 2 LEDS one green and one red that light up when the amp is hooked up, on, and powered properly. I noticed that if I unhook the sub and hook the remote wire up, the Red LED lights up faintly then goes out. I have no clue what could have happened. Today Im going to take it all apart to check all my wires and test the amp, but before I do that I was wondering if anyone could chime in and help me out with what could possibly be wrong? Oh this amp was made in 2002 and has a12" Eclipse 8122DVC Aluminum hooked up to it and has 0 gauge wire. I already checked all the fuses on the amp and the main lead fuse and they are fine. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
KISS 113 by Andre Jute | Vacuum Tubes | |||
here is how firewire ports fail | Pro Audio | |||
List of NOS mostly tubes | Vacuum Tubes | |||
Damping Material Question | Car Audio | |||
FS: SOUNDSTREAM CLOSEOUTS AND MORE!! | Car Audio |