I just ordered a JVC RX-D302B receiver from Crutchfield. Actually, this
is #2 - I sent back #1, a scratch-and-dent, because it quickly became
almost too hot to touch on top and filled the living room with the
smell of hot circuitry. It seemed to work fine otherwise, no
overheating shutdown, but still. Now #2, which is new, is doing the
same thing, and I'm wondering what is going on. Is this normal? I'm
using Polk Audio R40 speakers.

wrote in message
ups.com

I just ordered a JVC RX-D302B receiver from Crutchfield.
Actually, this is #2 - I sent back #1, a
scratch-and-dent, because it quickly became almost too
hot to touch on top and filled the living room with the
smell of hot circuitry. It seemed to work fine otherwise,
no overheating shutdown, but still. Now #2, which is new,
is doing the same thing, and I'm wondering what is going
on. Is this normal? I'm using Polk Audio R40 speakers.

What are the operational conditions when this nastiness happens?

If it happens when you are playing your system loud, maybe no problem.

If it happens when you just turn the receiver on, with no speakers or other
cables attached, then you have a problem.

You could have one or more shorted speaker cables.

Just when it's playing normally. I'll try replacing the speaker cables.

wrote in message
oups.com...
Just when it's playing normally. I'll try replacing the speaker cables.

Is the receiver installed in a cabinet, or out in the open?

wrote:
I just ordered a JVC RX-D302B receiver from Crutchfield. Actually, this
is #2 - I sent back #1, a scratch-and-dent, because it quickly became
almost too hot to touch on top and filled the living room with the
smell of hot circuitry. It seemed to work fine otherwise, no
overheating shutdown, but still. Now #2, which is new, is doing the
same thing, and I'm wondering what is going on. Is this normal? I'm
using Polk Audio R40 speakers.

Suggest you ask he

rec.audio.tech

But if you're nervous about your hot receiver, I suggest you return it
and get a receiver that runs cooler.

It's in an open cabinet. I tried unplugging the speaker wires and it
still gets hot and smells - not quite as much as before though.

" said:

It's in an open cabinet. I tried unplugging the speaker wires and it
still gets hot and smells - not quite as much as before though.


Definitely check your speaker wiring for shorts of some kind.
Either that, or there's something wrong with one or both of the
speakers themselves.

Have you tried another amp/receiver (not receiver nr. 1, but an
entirely different amp) ?

--

- Never argue with idiots, they drag you down their level and beat you with experience. -

wrote in message
oups.com...
Just when it's playing normally. I'll try replacing the speaker cables.

I'd return it.... I could only find 2 user reviews on this thing and both
complained about overheating and early failures.

http://tinyurl.com/qpgf6

ScottW

On 12 Mar 2006 22:20:16 -0800, "
wrote:

I just ordered a JVC RX-D302B receiver from Crutchfield. Actually, this
is #2 - I sent back #1, a scratch-and-dent, because it quickly became
almost too hot to touch on top and filled the living room with the
smell of hot circuitry. It seemed to work fine otherwise, no
overheating shutdown, but still. Now #2, which is new, is doing the
same thing, and I'm wondering what is going on. Is this normal? I'm
using Polk Audio R40 speakers.


I remember I had a Toshiba amp once. It worked fine with ordinary
speaker wire. Then I tried some fancy QED wire and the output stage
blew. So I went back to ordinary wire and never had any more trouble.

paul packer wrote:



I remember I had a Toshiba amp once. It worked fine with ordinary
speaker wire. Then I tried some fancy QED wire and the output stage
blew. So I went back to ordinary wire and never had any more trouble.

Well isn't this another proof that wire is not wire?

"Fella" wrote in message

paul packer wrote:



I remember I had a Toshiba amp once. It worked fine with
ordinary speaker wire. Then I tried some fancy QED wire
and the output stage blew. So I went back to ordinary
wire and never had any more trouble.

Well isn't this another proof that wire is not wire?

Who knows, maybe there was a problem with the installation of the wire.

On Tue, 14 Mar 2006 07:24:34 -0500, "Arny Krueger"
wrote:

"Fella" wrote in message
t
paul packer wrote:



I remember I had a Toshiba amp once. It worked fine with
ordinary speaker wire. Then I tried some fancy QED wire
and the output stage blew. So I went back to ordinary
wire and never had any more trouble.

Well isn't this another proof that wire is not wire?

Who knows, maybe there was a problem with the installation of the wire.

Oh Arny. I'm not as untechnical as all that!