| Home |
| Search |
| Today's Posts |
|
#1
Posted to rec.audio.tech
|
|||
|
|||
de-solder part side or underside
when removing a part from a circut board, should i heat the part side
or the underside? i am guessing the underside since thats where you're supposed to solder just wanted to make sure. also, when the part is removed should i be removing the existing solder before soldering a new part on? |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pioneer Part # needed | Car Audio | |||
| Side by Side Comparison..Ipod Shuffle, Creative Zen Nano, IRiver T 30 | Audio Opinions | |||
| rec.audio.car FAQ (Part 3/5) | Car Audio | |||
| rec.audio.car FAQ (Part 2/5) | Car Audio | |||
| rec.audio.car FAQ (Part 1/5) | Car Audio | |||
Threaded Mode