Home |
Search |
Today's Posts |
#1
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
Looking to buy parts if anyone can recommend a supplier .... I need
condensor heads .. maybe electret .--- altho I don't know of good quality ones --- to be used for lavaliers .. so omni patterns ...also looking for another Oktava MC012 with hypercardiod pattern .... please send a private message thanks |
#2
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
frz-man wrote:
Looking to buy parts if anyone can recommend a supplier .... I need condensor heads .. maybe electret .--- altho I don't know of good quality ones --- to be used for lavaliers .. so omni patterns Digi-Key carries various Panasonic and Knowles omni capsules. Call 1-800-DIGI-KEY and ask for a catalogue. ..also looking for another Oktava MC012 with hypercardiod pattern So, call the Sound Room, or Oktava USA and order it. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#3
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
I was looking for comparable capsules to Crown PZM .. such like
|
#4
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
frz-man wrote:
I was looking for comparable capsules to Crown PZM .. such like If you want a Crowm PZM, then buy one, if if you want to experiement with building you own Scott already told you where to shop. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* |
#5
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
frz-man wrote:
I was looking for comparable capsules to Crown PZM .. such like Actually, the Genex communications mikes capsules might be a reasonable choice. Their omni rolls off around 8 KHz like the Crown capsules do. That would make it a good choice for PZM mounting. All of the Panasonic and Knowles capsules have much too good high end extension for this sort of thing. But I thought you wanted this to make lav mikes? --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#6
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
"frz-man" writes:
Looking to buy parts if anyone can recommend a supplier .... I need condensor heads .. maybe electret .--- altho I don't know of good quality ones --- to be used for lavaliers .. so omni patterns ..also looking for another Oktava MC012 with hypercardiod pattern ... please send a private message thanks Join "micbuilders" on Yahoo groups. Lots of packrats and tinkerers there. It is difficult to find bare condenser elements, at least aside from the Panasonic types, but there are some sources. Richard |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Note to Trevor | Audio Opinions | |||
FS: Pro Audio Gear, Parts, Accessories | Pro Audio | |||
common mode rejection vs. crosstalk | Pro Audio | |||
Artists cut out the record biz | Pro Audio |