I have the following tube amplifier power supply parts for sale:

Polypropylene self-healing (=non electrolyte) filter capacitors 32
microfarad / 525 V AC, oval can 1 7/8 x 3 1/2 inch, 4 7/8 inch high (5
1/4 inch with contacts). New production assembled from US made parts.
Filled with non-PCB non-polar polypropylene oil that avoids swelling
and premaature failure. The capacitor is made from self-healing
metalized polypropylene film that will vaporize the electrode in the
region of a short (if there will be any during the use of the
capacitor) and will restore the capacitor to useful life. Dissipation
factor 0.03%. Working temperature up to 100 deg. Celsius, guaranteed
60,000 hours at 90 deg. C, much longer at room temperature. Have
several dozen to sell, $8 each.

Electrolytic capacitor 4,300 microfarad (yes, 4.3 Farad) / 200 V DC,
cylindrical can 3 inch dia x 4 1/4 inch high, US made. Have sesveral
dozen to sell, $5 each.

5834 (NL-649) mercury rectifier, NOS, 4-pin base, 2.5 V heater at 7 A,
bulb 1 1/2 inch dia x 3 1/2 inch tall, 4 1/2 inch tall with base.
Rectifies 2 A at 900 V max. with mercury glow. Have several dosen to
sell, $22 each.

Please contact me at the email if interested.

"Jiri Placek" wrote in message
ups.com...

Electrolytic capacitor 4,300 microfarad (yes, 4.3 Farad) / 200 V DC,
cylindrical can 3 inch dia x 4 1/4 inch high, US made. Have sesveral
dozen to sell, $5 each.

Don't mean to embarrass you, but you underscored your error with a "(yes,
4.3 Farad)." 4300 millionths of a farad is 4.3 thousandths of a farad. A
4.3/200v farad cap would take 2 men and a ... well I'm not that mean. I'll
leave that blank for the flamers. Was tempting though.

Cordially,
west