Home |
Search |
Today's Posts |
#1
|
|||
|
|||
looking for large slide-out keyboard tray
hello,
is there a place to get a slide-out tray to hold a 73 key midi keyboard? i'm building my own desk, very flat and simple. the only thing is i need my midi controller to slide under the desk. the slider hardware is what i need. i could build the shelf in two minutes if necessary. i don't want an omnirax or argosy. i hate all rack gear and bulkiness. thanks for any ideas |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
looking for large slide-out keyboard tray
On Sat, 15 Oct 2005 05:32:57 GMT, Ben Bradley
wrote: On 14 Oct 2005 21:50:34 -0700, wrote: hello, is there a place to get a slide-out tray to hold a 73 key midi keyboard? i'm building my own desk, very flat and simple. the only thing is i need my midi controller to slide under the desk. the slider hardware is what i need. i could build the shelf in two minutes if necessary. i don't want an omnirax or argosy. i hate all rack gear and bulkiness. thanks for any ideas Home Depot, and presumably Lowe's and other such home improvement stores have the slides to make such drawers. And the lumber and finishing supplies to make the platform, too... jtougas listen- there's a hell of a good universe next door let's go e.e. cummings |
#4
|
|||
|
|||
looking for large slide-out keyboard tray
On 14 Oct 2005 21:50:34 -0700, wrote:
hello, is there a place to get a slide-out tray to hold a 73 key midi keyboard? i'm building my own desk, very flat and simple. the only thing is i need my midi controller to slide under the desk. the slider hardware is what i need. i could build the shelf in two minutes if necessary. i don't want an omnirax or argosy. i hate all rack gear and bulkiness. thanks for any ideas HeyYa, If you're still looking for slider hardware, go to www.rockler.com and have a look at the range of cabinet hardware mfg'd by Accuride. Here are a few search terms for the range from Accuride : Series 2132 (3/4 externsion Drawer slide), Series 3832 ( Full Extension Box-drawer slide) and Series 3864 (Over-Travel Telescoping Shelf Slides). Your local home-improvement mega-mart might have a FEW similar items in their cabinet or storage dept., but the Rockler website offers the full range of possibilities, along with technical-drawings & installation-guidelines PDF-downloads. The price range is from $15 to $30, and there are some options regarding the Finish of the hardware Primary consideration would be the Depth of the "shelf" and the Extension (or travel-length) of the slide-out; secondarily, the weight-capacity or load-rating might be also be a consideration, depending on your keyboard-playing style. (presumably, you've already considered & rejected the idea of installing simple 1"x2" pine Rails to support a plywood shelf? sand-down all corners & edges to minimize snags in the slide-action... an application of wax or polyurthane to the friction-bearing surfaces to improve wear-durability... some scrap-pieces of 1"x2" pine & wood-screws to assemble a simple drawer-stop to prevent the shelf & MIDI-KB from "spilling-out" & crashing down onto your toes...) either way, have fun with your project... HSH |
Reply |
Thread Tools | |
Display Modes | |
|
|