Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi all,
Have a Technics home theater receiver. Have an intermittent problem with center channel -- sometimes after turning on receiver will get no sound from center channel, but it's possible to turn up the volume until the center channel just comes on. I can then turn down the volume and the center channel stays on. Have checked speaker wire connections, even changed out the wire. After a couple of searches on Google Groups, it sounds like it is a "speaker protection relay" problem. Does that sound right? Is this something that can be readily fixed with, say, a can of compressed air? (There was quite a bit of dust over the ventilation grill...) If so, are these things relatively easy to find inside the receiver? Thanks in advance! |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Technics receiver overload | Tech | |||
Howard's Three Channel Solution | Audio Opinions | |||
Designs for a single frequency high performance AM-MW receiver? | Vacuum Tubes | |||
FS: Technics SA-425 Receiver | Marketplace | |||
Main speakers with builtin subwoofer - How to configure receiver? | Audio Opinions |