Reply
 
Thread Tools Display Modes
  #1   Report Post  
jeffypop
 
Posts: n/a
Default connecting 2 gagues

I bought 2 surround speaker stands. I tried to thread my speaker wire
through the stand, but it's too thick.

Is it safe to use a smaller gague wire to connect the thicker wire and
the speaker. I'm sure it will degrade the performance, but is it safe?
I don't know much about audio, so I'm wondering if it creates a fire
hazard or anything.

  #2   Report Post  
Robert Morein
 
Posts: n/a
Default


"jeffypop" wrote in message
ps.com...
I bought 2 surround speaker stands. I tried to thread my speaker wire
through the stand, but it's too thick.

Is it safe to use a smaller gague wire to connect the thicker wire and
the speaker. I'm sure it will degrade the performance, but is it safe?
I don't know much about audio, so I'm wondering if it creates a fire
hazard or anything.

It is completely safe.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecting SPDIF? [email protected] Pro Audio 10 February 13th 05 07:44 PM
Connecting Pin 1 to chassis Samuel Groner Pro Audio 5 February 29th 04 08:40 AM
Connecting Headphones to a pre-amp Ross Fletcher Tech 12 December 21st 03 07:33 AM
NOT connecting the shield to ground! Rich Andrews Vacuum Tubes 19 December 5th 03 08:20 AM
Problem connecting Fostex D2424LV to Behringer DDX3216 mike haskins Pro Audio 2 September 14th 03 01:37 AM


All times are GMT +1. The time now is 02:41 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"