I spent almost 8 hours today trying to get the perfect enclosure. It is for
a RE HC 15. I have one in there reccomended box for SQ and its damn loud but
I want it louder Heres what I have got does this look ok? The port I just
subtract half the height from since its slot loaded right?First time
building my own box all help appreciated.
It has an AudioControl subsonic filter at 33 hz.
----------------------------------------
Driver Properties
Name: HC15
Type: Standard one-way driver
Company: Resonant Engineering
No. of Drivers = 1
Dual voice coils = series
Fs = 25.7 Hz
Qms = 7.06
Vas = 114.6 liters
Xmax = 21 mm
Sd = 810 sq.cm
Qes = 0.43
Re = 4.4 ohms
Z = 8 ohms
BL = 22.6 Tm
Pe = 1200 watts
Qts = 0.4
1-W SPL = 88.5 dB
-----------------------------------------
Box Properties
Name:
Type: Vented Box w/ Active HP Filter
Shape: Prism, square
Vb = 3.749 cu.ft
Fb = 38.27 Hz
F3 = 28.79 Hz
Fill = none
No. of Vents = 1
Vent shape = rectangle
Vent ends = one flush
Hv = 18.5 in
Wv = 2.75 in
Lv = 22 in
-----------------------------------------
Active 12 dB/oct. HP Filter
Fx = 33 Hz
Qx = 2


I have the blueprints all printed out and am ready to start assuming that
this configuration will work.

oh yeah according to these graphs it reaches maximum excursion at 32 hz so
the 24db octave subsonic should fix that issue right?Also its 51^ inch port
area.

"wicked1" wrote in message
...
I spent almost 8 hours today trying to get the perfect enclosure. It is
for
a RE HC 15. I have one in there reccomended box for SQ and its damn loud
but
I want it louder Heres what I have got does this look ok? The port I
just
subtract half the height from since its slot loaded right?First time
building my own box all help appreciated.
It has an AudioControl subsonic filter at 33 hz.
----------------------------------------
Driver Properties
Name: HC15
Type: Standard one-way driver
Company: Resonant Engineering
No. of Drivers = 1
Dual voice coils = series
Fs = 25.7 Hz
Qms = 7.06
Vas = 114.6 liters
Xmax = 21 mm
Sd = 810 sq.cm
Qes = 0.43
Re = 4.4 ohms
Z = 8 ohms
BL = 22.6 Tm
Pe = 1200 watts
Qts = 0.4
1-W SPL = 88.5 dB
-----------------------------------------
Box Properties
Name:
Type: Vented Box w/ Active HP Filter
Shape: Prism, square
Vb = 3.749 cu.ft
Fb = 38.27 Hz
F3 = 28.79 Hz
Fill = none
No. of Vents = 1
Vent shape = rectangle
Vent ends = one flush
Hv = 18.5 in
Wv = 2.75 in
Lv = 22 in
-----------------------------------------
Active 12 dB/oct. HP Filter
Fx = 33 Hz
Qx = 2


I have the blueprints all printed out and am ready to start assuming that
this configuration will work.