Home |
Search |
Today's Posts |
#1
|
|||
|
|||
advice single space mic/line mixer
Help..I'm looking for a single-space mic/line mixer with 48V phantom
power and an effects send for each channel. Any ideas? -Rick |
#3
|
|||
|
|||
Quote:
__________________
Fletcher http://www.mercenary.com Roscoe Ambel once said: Pro-Tools is to audio what fluorescent is to light |
#4
|
|||
|
|||
Rolls ain't exactly known for highest quality , but i'd like to know if there is a decent one to mix micpres with only a touch of verb maybe for two track recording . Who makes the cleanest ? [ good headroom , low noise ] regards Greg "S O'Neill" wrote in message ... wrote: Help..I'm looking for a single-space mic/line mixer with 48V phantom power and an effects send for each channel. Rolls makes one. |
#5
|
|||
|
|||
In article jBIPd.376997$Xk.50379@pd7tw3no, GKB wrote:
Rolls ain't exactly known for highest quality , but i'd like to know if there is a decent one to mix micpres with only a touch of verb maybe for two track recording . Who makes the cleanest ? [ good headroom , low noise ] Does it absolutely HAVE to be single-space? I think Great River makes such a box, but it's 2U. And there's always the Millennia Media Mixing Suite, which is something like 4U or 5U as I recall. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
wrote in message ups.com... Help..I'm looking for a single-space mic/line mixer with 48V phantom power and an effects send for each channel. Any ideas? -Rick Do you mean 1U (1.75" high) x 19" wide, rack mounting? Gasp! How many m/l channels do u expect to cram in? At what mains supply voltage? U can just about get a single stereo processor with all bells and whistles in there. 2U at least will give you scope for more makes. Jim |
#8
|
|||
|
|||
Scott Dorsey wrote:
Does it absolutely HAVE to be single-space? If so, how about the API 3124M? -- ha |
#9
|
|||
|
|||
|
#10
|
|||
|
|||
In article , Fletcher
wrote: Wrote: Help..I'm looking for a single-space mic/line mixer with 48V phantom power and an effects send for each channel. Any ideas? -Rick The API 3124MB+ does exactly what you say you're looking to achieve... the Speck "5.0" pres can be built into a mixer with no real size restrictions while still giving you direct out capability [no aux send bus] -- Fletcher Or the API 8200 or the TRUE Systems Precision 8 How much did you want to spend? |
#11
|
|||
|
|||
Mike Rivers wrote:
In article writes: Do you mean 1U (1.75" high) x 19" wide, rack mounting? Gasp! How many m/l channels do u expect to cram in? At what mains supply voltage? U can just about get a single stereo processor with all bells and whistles in there. ATI used to make both an 8 and 16 channel 1U mixer with mic preamps, pan pots, and a limiter on each channel. Quite expensive, and I believe both are now discontinued. These are really nice units. But no effects sends. Rob R. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Mackie CR-1604 16-channel Mic/Line Mixer | Marketplace | |||
FA: Mackie CR-1604 16-channel Mic/Line Mixer | Marketplace | |||
Regarding: 6 speakers 1 powered mixer | Pro Audio | |||
Mixer suggestion... | Pro Audio | |||
Mixing/Summing in DAW or Digital Mixer for best quality? (long) | Pro Audio |