Menu

Guitar Reamping Question (schematic link)

#1

Report Post

Mike Rivers

Posts: n/a

Default

Guitar Reamping Question (schematic link)

In article et writes:

It is basically an H pad feeding a series RC in
parallel with the transformer 500 ohm side ( not center
tapped as previously stated in error) It has 2x 175
ohms on the input side, 2x 113 ohms on the output and
the center of the H is bridged by 338 ohms. The RC on
the input side is 100 ohms and 96 pf.

The transformer output goes across a 50 K pot with the
wiper being the output hot.

Doesn't sound like any big secrets there. A transformer in a box, with
a level control. The RC is probably to flatten out the transformer.

--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo

Reply With Quote

Reply With Quote

Thread Tools
Show Printable Version
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mic Questions	Twist Turner	Pro Audio	22	November 25th 03 03:04 AM
BEHRINGER SHIPS V-TONE GUITAR PACK	SGAE1976	Pro Audio	3	November 15th 03 03:48 PM
Need Help Recording Guitar - vastly appreciate help!	me	Pro Audio	15	October 28th 03 08:53 PM
guitar mics and preamps	M	Pro Audio	8	September 6th 03 04:51 PM
Help with Guitar Tracks Pro!!!	Stephanie	Pro Audio	2	July 24th 03 06:03 PM

All times are GMT +1. The time now is 08:04 PM.

About Us

"It's about Audio and hi-fi"

Contact Us AudioBanter Home Privacy Statement