Reply
 
Thread Tools Display Modes
  #1   Report Post  
db:southcongress
 
Posts: n/a
Default speaker cable and powered monitors

hi,
what kind of cable should i be using for powered monitors? speaker,
line or 'powered monitor' speaker cable? what's the difference? i
bought the standard monster speaker cable when i bought the monitors
and i was told last night i could use line cable if wanted because no
load was going through the cable. that makes sense to me and i'm just
looking for a little more info.

thanks,
dave
  #2   Report Post  
Scott Dorsey
 
Posts: n/a
Default

In article ,
db:southcongress wrote:
hi,
what kind of cable should i be using for powered monitors? speaker,
line or 'powered monitor' speaker cable? what's the difference? i
bought the standard monster speaker cable when i bought the monitors
and i was told last night i could use line cable if wanted because no
load was going through the cable. that makes sense to me and i'm just
looking for a little more info.


No, you need shielded cable. You are sending a line level signal to the
box, not a speaker level signal.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
here is how firewire ports fail George Pro Audio 13 September 11th 04 09:11 PM
Topic Police Steve Jorgensen Pro Audio 85 July 9th 04 11:47 PM
Speaker Cables and Interconnects, your opinion Stewart Audio Opinions 61 November 14th 03 05:41 PM


All times are GMT +1. The time now is 06:15 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"