Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
For Sale: HEWLETT-PACKARD 204D AUDIO OSCILLATOR
Picture at: http://mywebpages.comcast.net/mnowlen/hp204d.htm SUMMARY: Solid State, 5 Hz to 1.2 Mhz, with 10 dB step attenuator covering -70 to +10 dBm DESCRIPTION: This is a fantastic Solid State sine wave oscillator perfect for hifi, guitar amp, and any general purpose bench work. Provides stable, high quality signals, low distortion, excellent flatness and has large, well calibrated dial. Super high quality as is typical of HP. Nice, small and light. 10 dB step attenuator covering -70 to +10 dBm SPECIFICATIONS: Frequency Range: 5 Hz to 1.2 MHz, Number of Ranges: 6 Overlapping Dial Accuracy: +/-3%, Flatness: +/- 1% or better, Output Voltage: 2.5 Volts RMS (10 mW) into 600 ohms or 5.0 VRMS open circuit, Attenuator: Continuously Variable 40dB range Distortion: .1% 30 Hz to 100 KHz, Hum and Noise Voltage: 0.01% of output Synchronization Output: Can be synchronized to an external signal. Synchronization Output: Sine wave in phase with output; fixed level 100mV into 10 Kohms, 100pF, Input Voltage: 115 or 230 VAC, Power Consumption: 7 VA, Net Weight: 6 lbs (2.7kg), Shipping Wt.: 8 lbs (3.6 kg), Dimensions: 6.1 x.5.1 x 8" CONDITION: Excellent, Checked and working. Comes with power cord and copy of manual which includes operating instructions. Has stenciled markings on sides. 7 day right to return inspection period. 30 Day repair or replace Warrenty. $125 plus $10 shipping with insurance in Contiental US. Thanks for looking |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS HEWLETT-PACKARD 204D Audio Oscillator with Step Attenuator | Pro Audio | |||
FS HEWLETT-PACKARD 204D Audio Oscillator with 10 dB Step Attenuator | Pro Audio | |||
science vs. pseudo-science | High End Audio | |||
Why DBTs in audio do not deliver (was: Finally ... The Furutech CD-do-something) | High End Audio | |||
New Audio Editing Software, Dexster | Pro Audio |