Reply
 
Thread Tools Display Modes
  #1   Report Post  
Alj
 
Posts: n/a
Default Problems with NAD 3130

Hello, i have these settings:

Left 8 ohm, Right 8 ohm }Speakers
Left 4 ohm, Right 4 ohm }Speakers
NAD 3130
XBOX

When i have the volume at low sound it doesent come any sound to the
two right speakers.
Ofcourse i wonder why, and what can i do about it?

Greetings, Adam
  #2   Report Post  
Jerry G.
 
Posts: n/a
Default Problems with NAD 3130

This may be from a cold solder connection especially in the output stage. If
your model uses a protection relay, the contacts may be going bad, or may be
oxidized.

Take care that the specs for your amp are rated for 4 ohms. Many of these
amps are 8 ohm only, and the output stage will overheat when using 4 ohm
speakers. Overheating the output stage, can lead to some very expensive
problems to deal with.

--

Jerry G.
==========================


"Alj" wrote in message
om...
Hello, i have these settings:

Left 8 ohm, Right 8 ohm }Speakers
Left 4 ohm, Right 4 ohm }Speakers
NAD 3130
XBOX

When i have the volume at low sound it doesent come any sound to the
two right speakers.
Ofcourse i wonder why, and what can i do about it?

Greetings, Adam


  #3   Report Post  
Alj
 
Posts: n/a
Default Problems with NAD 3130

"Jerry G." wrote in message ...
This may be from a cold solder connection especially in the output stage. If
your model uses a protection relay, the contacts may be going bad, or may be
oxidized.

Take care that the specs for your amp are rated for 4 ohms. Many of these
amps are 8 ohm only, and the output stage will overheat when using 4 ohm
speakers. Overheating the output stage, can lead to some very expensive
problems to deal with.

--

Jerry G.
==========================


"Alj" wrote in message
om...
Hello, i have these settings:

Left 8 ohm, Right 8 ohm }Speakers
Left 4 ohm, Right 4 ohm }Speakers
NAD 3130
XBOX

When i have the volume at low sound it doesent come any sound to the
two right speakers.
Ofcourse i wonder why, and what can i do about it?

Greetings, Adam


Okey, i will check that about oxidation, but are you sure that i may
ruin my amp if i use those settings?
The Amp has a switch that lets you choose betwen 8ohm and 4ohm, what
should i then use, i have as i said 2 8ohm speakers and 2 4ohm
speakers.
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
dvd technical problems Mark A Tech 1 September 6th 03 04:54 AM
Anyone Else Just Get An 828mkII? Having Problems? bushgeeza Pro Audio 3 July 28th 03 06:27 AM


All times are GMT +1. The time now is 05:44 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"