Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Schematics for Mike Preamp, Phantom Power supply Needed.
Hi there,
Im busy trying to build a preamp for a microphone. It also has to be able to supply phantom power, because the mike is a condenser mike. (ECM8000) What I really need help with is getting schematics of something that conforms to these requirements. Im working on a university project that has already gone over its budget. What I need to try and do is see if building such a mike preamp will be cheaper than buying one. The one that I have in mind to buy is the MIC100 from Behringer (which retails at about $40 or something like that ) Partial answers are also very much appreciated, like if I could build a phantom power supply, but without the preamp etc. Likewise for any building tips/component recomendations etc. Thanks alot. Witek. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Cord recommendation | Audio Opinions | |||
Need Phantom Power Supply That is Not a Switching Supply | Pro Audio | |||
Cheap Phantom Power Supply, Opinons on Behringer B-2 Mike | Pro Audio | |||
O.T. Grocery clerks strike | Audio Opinions | |||
Power outage | Pro Audio |