I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.

"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.

"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.

http://www.gmayor.com/copy_vinyl_to_CDR.htm

http://www.a-reny.com/iexplorer/restauration.html


Here's a couple links.


Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"Mark A" wrote in message
...
"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need
a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.

http://www.gmayor.com/copy_vinyl_to_CDR.htm

http://www.a-reny.com/iexplorer/restauration.html


Here's a couple links.


Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"Mark A" wrote in message
...
"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need
a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.

http://www.gmayor.com/copy_vinyl_to_CDR.htm

http://www.a-reny.com/iexplorer/restauration.html


Here's a couple links.


Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"Mark A" wrote in message
...
"EV World Editor" wrote in message
...
I have a Sony Desktop PC that's about 2 years old with an Aureal
soundcard and AVS audio software. Can't seem to figure out how to take
sound off my Marantz cassette desk on which I conduct interviews and
get it into the PC so that it can be digitized by the AVS software. (I
also have SoundForge XP4.5).

I have the Marantz' line output going into the PC's line in. (I have
also tried the microphone connection) The audio plays through the
headphone output on the PC just fine. But I cannot get the digital
audio editing software to "hear" the signal. I have tried every
setting I can think of without success. I have gone into the audio
manager and made sure that the appropriate settings have been made.

I have traditionally digitized my audio on my Mac G4, but for
convenience, I wanted to do it on the Sony.

Any suggestions?

I don't know anything about the software you have, but you typically need
a
recording program. Some PC's (and soundboards) come with a recording
program, and some don't. You can probably get a freeware recording program
if your soundcard does not come with the software needed. MS windows
recorder will also work, but has some limitations I believe.