Hello all - question for you.

In my studio I use both an analog board and a digital board for different
projects (Digi=post, analog=music). To eliminate patching all the time I
would love to have my U-87 going into both boards at the same time: thru my
Fairman TRC pre-amp to the analog board, and to the built-in mic pres on the
digital (DM-24).
If I patch the mic to a passive mult in my patchbay and from there go to
both the preamp and digital board (getting 48V from either source) will that
cause a signal degradation?

I know patching is easy and that's why we have patchbays in the first place,
but I have engineers working on different projects, and they are not all up
to speed on the patchbay.

Thanks

Rasmus Schwenger