Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
TASCAM M-480 LINE / KEYBOARD RACK MIXER
48 input 6U rackmount mixer, specifically designed for line input sources. The M-480 can accommodate 2 input signals (A & B) per channel. Each channel allows the selection of either or both input sources. There is independent control over each signal's input level (-30dBm to +4dBm) and stereo position. 6 independent SEND OUT jacks and 6 Stereo RETURN jacks. Output of 2 of the 6 SEND OUT jacks can be switched to pre-fader or post-fader. These jacks allow use of various kinds of effects devices for monitoring applications. Two independent outputs (MASTER OOUT and SUB OUT) are provided. Each channel's output can be sent to either or both of these outputs using the Output Select Switch. The MASTER OUT includes a Mute Switch and Mute Indicator. A MONITOR control is provided, allowing independent volume control of the MASTER OUT signal or SUB OUT signal through the MONITOR OUT jacks. The CUE switch of each channel allows hearing CUE signals from the MONITOR OUT jacks. These CUE signals can also be heard through headphones. MONITOR BUS input allows hearing the tempo "click" from a sequencer through the MONITOR OUT jacks or the Headphone jack. BUS INPUT includes the Send jacks (AUX 1-2, EFF 1-4) permitting "full-function" stacking of M-series mixers. The M-480's MASTER OUOT XLR connectors (balanced output) allow full interface to professional studio environments. Peak / Signal (PEAK/SIG) Indicator is provided for each channel and a 5-segment Peak Meter is provided in the MASTER/SUB section, assisting in setting accurate signal levels. The pre-fader signal level of the MASTER OUT and CUE-signal levels can be monitored with the MON/CUE Peak Meter by pressing the MONITOR SELECT switch or the CUE switch. Inputs are presented as 24 pairs, each with own input level trim sensitivity, pan and peak signal indicator. Input Select Switches allow A / B / A+B input signal, 4 Effect Volume Send controls, 2 AUX Volume Send controls (for 6 independent mono sends) MASTER/SUB Output Select switching, Channel volume and CUE switch. Master Section has Return volume x 6,EXT INput volume, Effects Send volume, AUX Send Volume and AUX Select Switch, Master peak Meter, Monitor / CUE Peak Meter, CUE / MUTE Indicators, Power Indicator, Mute On/Off Switch, Master Volume control. Master Balance, Sub Out Volume, Sub Out Balance Controls, Monitor Select Switch, Monitor Out Volume and Headphone Volume controls, Headphone Jack, Power Switch. Seriously, this mixer will do just about all you need as a line / keyboard / sub-mixer. Specifications: Frequency Response: 10Hz to 60kHz +1dB / -2dB Total Harmonic Distortion: 0.06% or less (20Hz to 20kHz at nominal output) Noise Level: (Input terminated with 150 ohm, IHF-A, Typ.) Equivalent Input Noise Level: -124dBm Residual Noise Level: -102dBm (All Volume Min) -80dBm (Master Volume Max, All Channel Volume Min) -77dBm (Master Volume Max, All Channel Volume Max, All SENS Min) -65dBm (Master Volume Max, All Channel Volume Max, All SENS Max) Crosstalk: -70dB or less (1kHz between channels) -70dB or less (1kHz between L and R) Power Supply: AC 117V, 230V or 240V (50/60 Hz) / 80W-93W Dimensions: 19 in W x 9.75 in D x 10.6 in H Weight: 28 pounds Excellent condition, barely used, includes the operation manual. $475 obo Mark +1140 eBay rating, many net references Located Arlington,TX Pictures: http://www.markglinsky.com/pics/TascamM480.jpg http://www.markglinsky.com/pics/TascamM481.jpg Much more studio equipment FS: http://www.markglinsky.com/Msgmus.html Musical / Audio / Video Equipment Manuals available at: http://www.markglinsky.com/ManualManor.html |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.audio.car FAQ (Part 2/5) | Car Audio | |||
FS: Tascam M1516 mixer - $300 | Pro Audio | |||
Small line mixer recommendation | Pro Audio | |||
FS: Manley 16X2 Tube Line Mixer - price drop | Pro Audio | |||
good 12-16 channel mixer around $500 | Pro Audio |