I just received my Lynx2. My previous card was Delta1010, and I am trying to
see if I can use Lynx2 similar to how I used the delta. Also have some
unrelated questions.

1. With the delta1010, the monitor inputs (L,R) appear to applications as
separate inputs (i.e. separate from the analog and digital inputs). This was
a great feature, because I could play a softsynth, and then in SX or
something, I could choose the monitor inputs and this would enable me to
capture the digital audio that the softsynth was spittig out without having
to plug an output to an input and go through a D/A and A/D. Please tell me
the Lynx2 can do this. Someone on another forum told me it can, but I see no
indication of this.

2. On the Lynx site, there is a pdf file that talks about the mixer. It
shows inputs labeled LB1, LB2 which are Loopback1 and Loopback2. Are these
like the Delta Monitor inputs? The thing is, in my Lynx2 mixer (I have the 6
in 2 out version by the way), I do not see those inputs! What is going on?

3. The Lynx site has beta drivers that are for WDM. But they also include
GSIF, ASIO, etc. I need GSIF, but are these drivers ok. Lynx gives a warning
saying that the drivers can be dangerous!

4. On the delta, I could control the number of buffers so as to determine
ASIO latency. It was very convenient. When I choose a buffer size, it would
tell me what latency it corresponds to. I don't see any means to do this on
the Lynx2 mixer. How do you adjust the Lynx2 latency?

thanks,

brian