| Home |
| Search |
| Today's Posts |
|
#1
Posted to rec.audio.pro
|
|||
|
|||
Mic preamp output transformer question
Hi All,
In the mic preamp circuit, about halfway down this page: https://web.archive.org/web/20170831...-jfet-mic-pre/ ....should the output transformer be left floating at one end as pictured? Also, the output transformer I have has a center-tapped output, and the core is not broken out to a pin as pictured in the circuit diagram. Should I connect the center tap to pin 1 of the XLR socket instead? Thanks for any assistance! -Dan. |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Output transformer question | Vacuum Tubes | |||
| Question Quad II output transformer... | Vacuum Tubes | |||
| Question for Output Transformer Gurus | Vacuum Tubes | |||
| Dumb output transformer question | Vacuum Tubes | |||
| Output Transformer Rewind Question | Vacuum Tubes | |||
Threaded Mode