Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.audio.high-end
Bob Lombard[_2_] Bob Lombard[_2_] is offline
external usenet poster
 
Posts: 8
Default dispersion?

For the past couple years I have had Ohm Walsh "Super Two' speakers in
my 'number one' sound system. A recent room reorganization resulted in
an increase in reflective surfaces (from CDs in wall racks). The
speakers, which radiate their output 360 degrees around them, were
setting up a, ah, sonic boom interaction with some of those surfaces.
While I figured out what to do about it, I replaced the Ohm Walshes with
AR5 boxes that I've owned since 1972. Most of the booming went away, but
I discovered that I was very aware of the position of the sound sources.
The 'sound stage' was gone, replaced by two point sources. Must be I've
lost the ability to imagine it.

I have since place some plastic foam panels in strategic places, and
gone back to the Ohm Walsh speakers, but am wondering if modern speakers
of the same general physical construction as the AR5s still exhibit that
unfortunate 'feature' (directionality?).
 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about dispersion Dennis Moore High End Audio 14 October 9th 03 03:45 PM


All times are GMT +1. The time now is 03:44 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"