Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Does anyone know of a shock mount that will hold this mic? If so, please
tell me where I can find one. Thank you, Chuck Robertson |
#2
![]() |
|||
|
|||
![]() "Charles Robertson, Psy.D." wrote in message ... Does anyone know of a shock mount that will hold this mic? If so, please tell me where I can find one. Thank you, The ubiquitous and inexpensive Audio-Technica AT8410a should work nicely. Hal Laurent Baltimore |
#3
![]() |
|||
|
|||
![]()
In article ,
"Charles Robertson, Psy.D." wrote: Does anyone know of a shock mount that will hold this mic? If so, please tell me where I can find one. Thank you, Try the AKG SA30 shockmounts. They're fairly inexpensive, generic, adjustable and should work with most barrel-type SD condensers. They work with my 451s and my KM184s. |
#4
![]() |
|||
|
|||
![]()
I use AKG HA100 spider shoockmount for my 45 units and they are superb!!!
Ron Charles "Charles Robertson, Psy.D." wrote in message ... Does anyone know of a shock mount that will hold this mic? If so, please tell me where I can find one. Thank you, Chuck Robertson |
#5
![]() |
|||
|
|||
![]()
Charles Robertson, Psy.D. wrote:
Does anyone know of a shock mount that will hold this mic? If so, please tell me where I can find one. Thank you, Audio-Technica 8410 or 8415 work nicely and are not expensive. -- hank alrich * secret mountain audio recording * music production * sound reinforcement "If laughter is the best medicine let's take a double dose" |
#6
![]() |
|||
|
|||
![]()
Marshall (the mic importers, not the guitar amp company) has an inexpensive
($29) shock mount that fits small diaphragm mics. Not a high end piece of machining, but it doesn't cost much either. Scott Fraser |
#7
![]() |
|||
|
|||
![]()
Charles Robertson, Psy.D. wrote:
Thank you folks for alot of good replies. I will be placing the BLUE Lollipop capsule on my 451 and thought the large diaphram could use a shock mount. I have the AKG HA100 but it would not tighten down on the smaller body of the 451. I will look into the AudioTechnica baskets. The AKG HA15/22 won't do it either. They really only seem to fit my Neumann small diaphragm mics. Rob R. |
#8
![]() |
|||
|
|||
![]()
The AT8410a will take mic's as small as 16.8 mm in diameter.
Hal Laurent Baltimore |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
How to mount outdoor speakers-mounting and what wire to use | General | |||
"Shock and Awe" | Audio Opinions | |||
FA: Anvil Type Shock Rack Cases 4~16 Space NEW! NR | Pro Audio | |||
U-87 Shock Mount: Any source for generic elastic bands? | Pro Audio | |||
shaft mount radio locking nuts | Car Audio |