Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I am using the Beta 98 capsules to mic toms in live applications, and am
finding that they sound great for about an hour, and then after that, only one of them will begin to crackle and distort when played...I'm trying to start tracing the problem, but I have several potential culprits. It could be: the mic itself, the cable, the in-line amplifier, or the gate I haverunning through the insert. Tonight, I'm thinking I'll put the mic on a different tom, see if the crackle follows the mic, then go through a process of elimination, swapping out only one component at a time until I can figure it out. Any ideas on what might be the most likely offender? Thanks in advance. Jeff |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Problem with Kenwood KDC-MP625 shutting off | Car Audio | |||
Problem With Alpine Head Unit/Type E Subs (Part 2) | Car Audio | |||
rec.audio.car FAQ (Part 1/5) | Car Audio | |||
Electrical noise problem, hard to pin down | Car Audio | |||
problem recording on SMP system with Win2K | Pro Audio |