Home |
Search |
Today's Posts |
#1
Posted to rec.audio.car
|
|||
|
|||
Kenwood KGC-9042 EQ power connector pinout
I have one of these, (low profile electronic presettable) but it came
to me without the power connector. Its a common type, I robbed one off an old computer power supply (4 pin). I can get it to power up, but cannot identify which wire is for memory and which is the power on lead. Anyone have one of these? Can ya take a peek 'round the back and ID the wiring at the connector for me? |
#2
Posted to rec.audio.car
|
|||
|
|||
Kenwood KGC-9042 EQ power connector pinout
boardjunkie;2276775 Wrote: I have one of these [ ... ] I can get it to power up, but cannot identify which wire is for memory and which is the power .. If you've managed to get it powered up, and if I recall correctly there are only 4 wires (Accs, BATT, rem and ground) then set a preset, then remove one of the two wires you're using for power for a few seconds, the repower the unit and see if you've lost the preset -- if not, the one that remained powered is the Battery contant. Here's the manual for that unit (free at kenwoodusa.com) http://tinyurl.com/2782wk greetings -- Lee ------------------------------------------------------------------------ View thread: http://stage.caraudioforum.com/vb/sh...d.php?t=296837 CarAudioForum.com - Usenet Gateway w/over TWO million posts online! |
#3
Posted to rec.audio.car
|
|||
|
|||
Kenwood KGC-9042 EQ power connector pinout
On Feb 24, 2:52*am, Lee wrote:
boardjunkie;2276775 Wrote: I have one of these [ ... ] I can get it to power up, but cannot identify which wire is for memory and which is the power .. If you've managed to get it powered up, and if I recall correctly there are only 4 wires (Accs, BATT, rem and ground) then set a preset, then remove one of the two wires you're using for power for a few seconds, the repower the unit and see if you've lost the preset -- if not, the one that remained powered is the Battery contant. Here's the manual for that unit (free at kenwoodusa.com)http://tinyurl.com/2782wk greetings -- Lee ------------------------------------------------------------------------ View thread:http://stage.caraudioforum.com/vb/sh...d.php?t=296837 CarAudioForum.com - Usenet Gateway w/over TWO million posts online! Ahh...thanks for the manual link. I looked for it but only saw the one for the larger electronic EQ. Looks like it stores presets internally since there's only acc pwr, dimmer, and control leads. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Denon DCR-470R connector pinout | Car Audio | |||
pinout/wiring diagram for yamaha o2r my8ae/my8ae96 aes-on-db25 (d-sub 25-pin) connector? | Pro Audio | |||
Panasonic CQ-RD210EN connector pinout | Car Audio | |||
Pinout for Mazda 94-96 factory radio CD connector | Car Audio |