Hi
Can anyone help me with this.
It has only 8 pins, so I assume is a common earth speaker system.
I have no harness, since my girlfriend has removed it but I want to
fit it in my boat. This is quite an old set so I'm struggling to find
out any info.
Thanks

Pioneer usually labels the circuit board connection at the harness. You'll
probably have to remove the main board from the chassis in order to see the
labels, since most Pioneer radios only have one removable chassis panel.

David
UnderTheDash.com

"Nig" wrote in message
om...
Hi
Can anyone help me with this.
It has only 8 pins, so I assume is a common earth speaker system.
I have no harness, since my girlfriend has removed it but I want to
fit it in my boat. This is quite an old set so I'm struggling to find
out any info.
Thanks

"David" wrote in message news:3NK4b.20501$Go4.18523@lakeread01...
Pioneer usually labels the circuit board connection at the harness. You'll
probably have to remove the main board from the chassis in order to see the
labels, since most Pioneer radios only have one removable chassis panel.

David
UnderTheDash.com

"Nig" wrote in message
om...
Hi
Can anyone help me with this.
It has only 8 pins, so I assume is a common earth speaker system.
I have no harness, since my girlfriend has removed it but I want to
fit it in my boat. This is quite an old set so I'm struggling to find
out any info.
Thanks

Thanks David
I was hoping not to have to strip down the whole unit, but if needs be ?
I just hoped someone may have an old diagram to save me the bother.

(Nig) wrote in message . com...
"David" wrote in message news:3NK4b.20501$Go4.18523@lakeread01...
Pioneer usually labels the circuit board connection at the harness. You'll
probably have to remove the main board from the chassis in order to see the
labels, since most Pioneer radios only have one removable chassis panel.

David
UnderTheDash.com

"Nig" wrote in message
om...
Hi
Can anyone help me with this.
It has only 8 pins, so I assume is a common earth speaker system.
I have no harness, since my girlfriend has removed it but I want to
fit it in my boat. This is quite an old set so I'm struggling to find
out any info.
Thanks

I stripped the stereo and found the following
B.Rem
B.up
Acc
The others are for the 4 speaker and ground, anyone know which is
which for power, I assume Acc is permanent live.
Thanks

Thanks David
I was hoping not to have to strip down the whole unit, but if needs be ?
I just hoped someone may have an old diagram to save me the bother.

(Nig) wrote in message . com...
"David" wrote in message news:3NK4b.20501$Go4.18523@lakeread01...
Pioneer usually labels the circuit board connection at the harness. You'll
probably have to remove the main board from the chassis in order to see the
labels, since most Pioneer radios only have one removable chassis panel.

David
UnderTheDash.com

"Nig" wrote in message
om...

Thanks David
I was hoping not to have to strip down the whole unit, but if needs be ?
I just hoped someone may have an old diagram to save me the bother.

All sorted now thanks