Home |
Search |
Today's Posts |
#1
|
|||
|
|||
'line in' missing
In my volume control window there is no 'line in' option to be checked. And
it's not under optionsproperties either. I have the latest driver for my soundcard Realtek AC'97 on AOpen AX4SPE-UN motherboard. I think this is why there is no sound from my WinTV Go in the speakers. All other sounds work fine. I'm clueless. Does anybody have an idea? |
#2
|
|||
|
|||
"Irma" wrote in message et... In my volume control window there is no 'line in' option to be checked. And it's not under optionsproperties either. I have the latest driver for my soundcard Realtek AC'97 on AOpen AX4SPE-UN motherboard. I think this is why there is no sound from my WinTV Go in the speakers. All other sounds work fine. I'm clueless. Does anybody have an idea? Is this the full volume control mixer application, or just the single Windows volume control? Probably your WinTV should use the WAV device, not the Line In. This option would have to be checked in the mixer app. (generic advice) Mark Z. |
#3
|
|||
|
|||
"Irma" wrote ...
In my volume control window there is no 'line in' option to be checked. And it's not under optionsproperties either. I have the latest driver for my soundcard Realtek AC'97 on AOpen AX4SPE-UN motherboard. I think this is why there is no sound from my WinTV Go in the speakers. All other sounds work fine. I'm clueless. Does anybody have an idea? Perhaps a silly question, but you didn't mention whether it has a PHYSICAL connector identified as "Line-In"? Note that sometimes you must go to the setup section and select the Line-In check-box to make its volume control appear. |
#4
|
|||
|
|||
On Wed, 23 Mar 2005 05:20:08 -0800, "Richard Crowley"
wrote: "Irma" wrote ... In my volume control window there is no 'line in' option to be checked. And it's not under optionsproperties either. I have the latest driver for my soundcard Realtek AC'97 on AOpen AX4SPE-UN motherboard. I think this is why there is no sound from my WinTV Go in the speakers. All other sounds work fine. I'm clueless. Does anybody have an idea? Perhaps a silly question, but you didn't mention whether it has a PHYSICAL connector identified as "Line-In"? Note that sometimes you must go to the setup section and select the Line-In check-box to make its volume control appear. Open volume controls (not just master) Options: Select Record or Playback as desired. tick the box next to "Line In" Note some 4+ chanel boards use Line In as additional outputs. If you have 4 s+ speakers attached, you need to disable that mode first. , _ , | \ MKA: Steve Urbach , | )erek No JUNK in my email please , ____|_/ragonsclaw , / / / Running United Devices "Cure For Cancer" Project 24/7 Have you helped? http://www.grid.org |
#5
|
|||
|
|||
"Steve Urbach" schreef in bericht ... On Wed, 23 Mar 2005 05:20:08 -0800, "Richard Crowley" wrote: "Irma" wrote ... In my volume control window there is no 'line in' option to be checked. And it's not under optionsproperties either. I have the latest driver for my soundcard Realtek AC'97 on AOpen AX4SPE-UN motherboard. I think this is why there is no sound from my WinTV Go in the speakers. All other sounds work fine. I'm clueless. Does anybody have an idea? Perhaps a silly question, but you didn't mention whether it has a PHYSICAL connector identified as "Line-In"? The fysical connection is there, it's where I put in the plug that comes from the line-out of the tv-card. irma Note that sometimes you must go to the setup section and select the Line-In check-box to make its volume control appear. There's no line-in check-box to be checked. I'm beginning to suspect it is some kind of bug and I have to reinstall xp of whatever... :-( irma Open volume controls (not just master) Options: Select Record or Playback as desired. tick the box next to "Line In" Note some 4+ chanel boards use Line In as additional outputs. If you have 4 s+ speakers attached, you need to disable that mode first. , _ , | \ MKA: Steve Urbach , | )erek No JUNK in my email please , ____|_/ragonsclaw , / / / Running United Devices "Cure For Cancer" Project 24/7 Have you helped? http://www.grid.org |
#6
|
|||
|
|||
On Fri, 25 Mar 2005 14:04:20 +0100, "Irma" wrote:
There's no line-in check-box to be checked. I'm beginning to suspect it is some kind of bug and I have to reinstall xp of whatever... :-( irma Your sound card DRIVERS may not be installed correctly. See if there are new drivers available. Try the "update the divers" with the ones on old install disk if there are no new drivers. Another thought. Do you have more than one Sound card (device) on that machine (say onboard and a sound card)? , _ , | \ MKA: Steve Urbach , | )erek No JUNK in my email please , ____|_/ragonsclaw , / / / Running United Devices "Cure For Cancer" Project 24/7 Have you helped? http://www.grid.org |
#7
|
|||
|
|||
"Irma" wrote ...
There's no line-in check-box to be checked. I'm beginning to suspect it is some kind of bug and I have to reinstall xp of whatever... :-( Unlikely that you would have to re-install the OS. Are you saying that you DID find the window where all the *Recording* check boxes are, but there was none labeled "Line"? Or are you saying that you couldn't find the window with all the source check boxes? MS doesn't make it very easy to find. |
#8
|
|||
|
|||
Quote:
If I choose "SB Audigy 2 AZS Audio" as default for recording, I'm missing the option to choose Line-In in standard Windows mixer. (The slider isn't there.) If I choose "C-Media Wava Device" as default for recording, I can choose Line-In in standard Windows mixer, but I don't get any signal. |
#9
|
|||
|
|||
"jobi" wrote in message ... Richard Crowley Wrote: Are you saying that you DID find the window where all the *Recording* check boxes are, but there was none labeled "Line"? Or are you saying that you couldn't find the window with all the source check boxes? MS doesn't make it very easy to find. I have the same problem on my computer. If I choose "SB Audigy 2 AZS Audio" as default for recording, I'm missing the option to choose Line-In in standard Windows mixer. (The slider isn't there.) If I choose "C-Media Wava Device" as default for recording, I can choose Line-In in standard Windows mixer, but I don't get any signal. Add this one to the list of reasons to avoid being "blasted" by Creative Labs. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring problems at gig (phantom power/balanced line) | Pro Audio | |||
System warm-up | Audio Opinions | |||
Wiring problems at gig (phantom power/balanced line) | Pro Audio | |||
how to use/modify a guitar stomp box to use line level inputs and outputs ? | Pro Audio | |||
FS: MXR NOISE GATE / LINE DRIVERS (2) | Pro Audio |