Home |
Search |
Today's Posts |
#22
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]() "hank alrich" wrote in message ... Neil Gould wrote: Mike Rivers wrote: On 4/29/2013 10:49 AM, Neil Gould wrote: Even '70s era hobbiests who bought an 8-track Tascam recorder& mixer spent multiples of the cost of today's DAW/interface hardware. That's true. I had $3700 in a TASCAM Model 5 mixer and 80-8 recorder, and I think close to another grand in the companion dbx noise reduction unit for it. Let's not overlook that those were in '70s dollars, too. I bought a new Porsche back then for under $10k. ;-) The A80 cost a lot in the mid-1970's, but it also gave nearly thirty years of service with very little additional cost. With no mechanics to break down or need alignment, I'm betting a modern digital interface could do far better as long as you have something it will work with. In any case replacing one every 5 or ten years would still cost *far* less over 30 years, after allowing for inflation, depreciation, maintenance and finance costs. Trevor. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Recommendations for USB audio interface | Pro Audio | |||
24 channels of ADAT Computer interface for low$$$, high quality | Tech | |||
Unobtrusive, high quality speakers for stereo only? | High End Audio | |||
Unobtrusive, high quality speakers for stereo only? | Audio Opinions | |||
High Quality Stereo A/D/A converter as a set of "Gold Channels"? | Pro Audio |