Home |
Search |
Today's Posts |
|
#1
![]()
Posted to rec.audio.high-end
|
|||
|
|||
![]()
On Mon, 2 Aug 2010 06:08:38 -0700, bob wrote
(in article ): On Jul 31, 9:16=A0pm, Brafield wrote: I have a 100W per channel 8ohm Sony STR-DE197 tuner amp, at present powering small inexpensive Yamaha 6-ohm 60-200W speakers -- 6.5 x 6.5 x 12 inches wall mounted. First and foremost: Don't wall-mount speakers. Put them on stands (which don't have to be anything fancy), and pull them out into the room, so they're away from all the walls. Speaker placement is as important as choice of speaker. Agreed. Audio Advisor sells a very good pair of stands for $50. I bought them on sale for $30 a few months back and find them excellent. They are even fillable with either sand or lead shot to increase their mass (recommended) and lower their resonance (not to mention making them more stable mechanically). You don't HAVE to do this though. http://tinyurl.com/2bsf882 |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Advice on modest integrated amp | High End Audio | |||
WTB: JBL DX-1 Input/Output Crossover Cards to suit JBL's XPL-200 Speakers | Marketplace | |||
WTB: JBL DX-1 Input/Output Crossover Cards to suit JBL's XPL-200 Speakers | General | |||
WTB: JBL DX-1 Input/Output Crossover Cards to suit JBL's XPL-200 Speakers | Tech |