Home |
Search |
Today's Posts |
#10
![]()
Posted to rec.audio.opinion,rec.audio.pro,uk.rec.audio
|
|||
|
|||
![]()
In article , Wally
wrote: Powell wrote: Allthough the sonic effects of spikes may vary from speaker to speaker and from room to room, they do move the resonnance of the speaker-floor combo up in frequency. Sometimes it improves overall sound, sometimes it doesn't. But the effects have a very natural explanation. Care to explain the mechanism that causes the resonant frequency to move up? FWIW I decided not to comment on the bulk of the items asserted most recently as I didn't want to widen the issues. But a number of questions like the above did occur to me. The problem is that with no measurements, details of experimental arrangements, etc, it is often hard to assess the assertions people make. Given that consumer audio is awash with 'technobabble' I tend to place more reliance on that than on simply accepting assertions. You enjoy intellectualizing but it would behoove you to get off your penguin butt and do the work yourself. What makes you think he doesn't/hasn't? It's you that's making certain claims about the effects of spikes, and the onus is on you to support those claims with evidence. The fact that he's asking for evidence doesn't preclude him having done his own research already. Nor is it a requirement that someone must already have done their own personal measurements to ask for the measurements someone else claims to already have to support their assertions. The point of the scientific approach is that anyone who wishes can make their own decisions *based on the presented evidence*. Not on the basis that they must accept that the person making the assertions is an 'authority' who must not be questioned or doubted. Access to the measurements and details of how they were done allows anyone who wishes to come to their own conclusions. So for me the key point is the middle one made above. That Powell is making a series of assertions and claiming to have 'measurements' to back them up. As is the norm in physical science and engineering, this means we judge the assertions by examination of the evidence. Up to the person making the assertions to provide this. I see no reason at present to doubt he does have 'measurements', but none of us can judge their value without seeing them and knowing the details of how they were obtained. Hence my questions to him. I have noticed over they years that it is quite common on usenet (and perhaps in audio in particular) for some people to react to being asked for mere evidence or an explanation that can be tested on the basis of estabilished physical science as if being asked was a 'personal attack'. Hence responses using debating or other tactics like 'go for the man' for daring to question the asserted 'wisdom'. To me that seems at best an irrelevance, and at worst a smokescreen preventing each person from being able to form their own conclusions on the basis of the *evidence*. I have no real interest in debating games or personal arguments. So if no measurements are forthcoming I am content to leave the matter here and allow each person reading this thread to come to their own conclusions. Slainte, Jim -- Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html Audio Misc http://www.audiomisc.co.uk/index.html |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
speaker decoupling and spikes (contradiction?) | Pro Audio | |||
Speaker Stands: with or without spikes? | High End Audio | |||
Speaker Stands: with or without spikes? | Tech | |||
Speaker Spikes | Audio Opinions | |||
Tripod for Camcorder | Tech |