Home |
Search |
Today's Posts |
#9
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
"Mike Rivers" wrote in message
On Mar 25, 12:32 pm, Mike Rivers (that's me!) wrote: When the level is high enough so that the test will run, the interchannel crosstalk light on the RightMark level setting screen keeps going on and off. I should add that in a crosstalk measurement made by recording with a signal on one channel and a shorting plug in the other channel's input connector, the crosstalk on playback was rather high, with the "unrecorded" channel measuring about 45 dB lower than the recorded channel, at 200 Hz and 10 kHz. Spec is -77 dB or so at 1 kHz. So maybe this one is broken, but that wouldn't explain the poor frequency response that RMAA shows. Umm, is there a possibility that this laptop only has a mono input? I know a lot of laptops do. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Delta 1010 Tests with RightMark Audio Analyzer | Pro Audio | |||
RightMark Audio Analyzer | Pro Audio | |||
Looking for a BPM program | Pro Audio | |||
Spectrum Analyzer | Audio Opinions | |||
Box Program | Car Audio |