Home |
Search |
Today's Posts |
#4
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
On Nov 9, 7:19 pm, "soundhaspriority" wrote:
wrote in message ... Thanks Bob, I've now determined it's the headphone socket... do you think that can be repaired? The card appears to be permanently sealed. Gerard Gerry, Try some CaigDeoxit:http://www.partsexpress.com/pe/showd...number=341-200 The stuff is somewhat toxic, so you may wish to leave the cable permanently connected. If that doesn't fix it, there is a solder joint problem in the card. I would suggest factory service, because if you take it apart and reassemble it, it may get stuck in the slot. Bob Morein (310) 237-6511 Stuff is not toxic. 100% liquid is actually very safe. If you spray it has a solvent, depending on which version, just be careful as you would any spray. I've been using this stuff for 30 years - it works amazingly well. Mike |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
pcmcia/cardbus II to express pc card adaptor ? | Pro Audio | |||
FA: RME Multiface & Cardbus | Marketplace | |||
FA: RME Multiface & Cardbus | Marketplace | |||
CardBus VS Firewire | Pro Audio | |||
PCMCIA Type II aka CardBus VS Firewire | Pro Audio |