Home |
Search |
Today's Posts |
#1
![]()
Posted to rec.audio.tech
|
|||
|
|||
![]()
I have 2 New Alesis HD24's (replacing 3 DA-88's) and trying to hook
them up in order to sync them for remixing to a Sony RS-422 9 PIN sub D controller. I purchased a used MOTU DTP and hooked it all up and nothing is talking to each other. I previously did this fine with the old DA-88's and a SY-88 Sunc Card for over 9 years without a single problem. Now I'm stuck and out of money. I was told by Alesis and MOTU this setup would work. I have called and emailed now that it doesn't and get no response. Any ideas as to what I am doing wrong? I really need help ASAP as a project is in the works. Thanks for your time and info |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
ADAT HD24 synced to DVCAM Machine Editor | Pro Audio | |||
Alesis HD24 question | Pro Audio | |||
How do I get MMC/MTC/SMPTE between Sonar, Tascam 1884, and an ADAT? | Pro Audio | |||
FA : Alesis adat HD24 Hard Disk Recorder Like New | Pro Audio | |||
ADAT HD24 output level mismatch with Blackfaces | Pro Audio |