Home |
Search |
Today's Posts |
|
#1
![]()
Posted to rec.audio.tech
|
|||
|
|||
![]()
kiwianalog wrote:
"Powell" wrote in message ... This integrated amp operates normally for about three minutes then abruptly buzzes and goes offline (no sound but power light indicating online). If immediately restarting amp resumes online power light but no sound. After a longer cooling down period and then re-powering the unit, it will go back online and play over the speakers only to shut-down (no sound/power on) after about three minute of normal play. Any methodologies to diagnosis or identify the source of problem would be helpful? The shortwave radio back-up isn't making for me in the weight room. ![]() Open it up and turn it on from cold until it shuts down then quickly feel all the transistors, mosfets or what ever it uses, if one is really hot then this component may need replacing, be careful of your fingers though, don't get burnt. This is a real quick and dirty method that with luck will solve your problem otherwise it will require more expertise that can be practically given over the internet. I'd begin by checking power supply components and solder connections. Especially any solder connections involving a regulator transistor. Mark Z. |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Status of Luxman? | High End Audio | |||
Integrated Luxman 38FD | Vacuum Tubes | |||
Luxman R-1070 receiver repair and spares | Tech | |||
Guitar amp recommendation | Vacuum Tubes | |||
Recommendation for SACD player | Tech |